Advertisement
Cable Map Testing：
Caution
•
When use the product for RJ45 or RJ11 cable mapping, please
only plug in the cable to the RJ45/RJ11 "TEST socket" on the
transmitter. Do not use RJ45 SCAN or RJ11 SCAN socket.
•
You can use the MT-7029 Transmitter or Receiver to validate
the cable map on RJ45/RJ11 by RJ45/RJ11compatible
connector on transmitter. The cable map function finds the most
common wiring faults on twisted pair cabling: shorts, opens, and
crossed pairs.
1.
Connect the MT-7029 Transmitter or Receiver to RJ45/ RJ11
jacks.
2.
Press"
and turn on the power. Press"
for cable mapping and shielded function indication. When the
green LED indicator flickers slowly, the low speed scan is
working. Press "
flickers faster, and the fast speed scan will be operated.
Press "
next operation.
Caution
•
Each LED that corresponding to an active pin flashes
briefly and should light for about 1 second. For fast scan
Figure 4 Isolating Cable
", the indicator of "POWER/ BAT LOW" will light up
" button again, the green LED indicator
" button again, the product will be standby for
" on MT-7029 transmitter
10
Advertisement
