Extraordinary Maintenance - Smeg Linea SFA6101TVB Manual

4. Press the Select knob
5. Turn the Select knob
Cooking Indicator light
set the time at which you want the
Pyrolytic cycle to end.
6. Wait 3 seconds before confirming the
settings.
7. The appliance waits until the set start time
to start the Pyrolytic cycle.
It is not possible to select any
function once the door lock device
has been activated. It is anyway
possible to switch off the
appliance by moving the Function
Knob
Cleaning and maintenance
(the End of
turns on) to
to 0.

4.6 Extraordinary maintenance

Removing and installing the door seal
(not on pyrolytic models)
To remove the seal:
• Release the clips located in the 4 corners
and pull the seal outwards.
To refit the seal:
• Hook the clips in the 4 corners onto the
seal.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
47