Table of Contents
Advertisement
Setting the
Clock
NOTE: Information Blink
For mode setting, blink will
guide to next step.
When your oven is plugged in for the
first time or when power resumes after a
power interruption, all of the display
segments will be lit up for 15 seconds
then '12:00' will be shown in the
display; you will then need to reset the
clock.
If the clock (or display) shows any
strange looking symbols, unplug your
oven from the electrical socket and plug
it back in and reset the clock.
In the following example I will show you how to set the time for 14:35.
Make sure that you have removed all packaging from your oven.
Make sure that you have correctly installed your oven as described
earlier in this book.
Press STOP/CLEAR.
Press Clock once.
Turn CONTROL dial knob until display shows "14:00".
Press Enter for hour confirmation
Turn CONTROL dial knob until display shows "14:35".
Press Enter.
The clock starts counting.
20
Advertisement
Table of Contents
