Makita GA5040R Instruction Manual page 12

Model GA4541R, GA5041R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model GA6040R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model GA4540R
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model GA4541R, GA5040R, GA6040R
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model GA5041R
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration
emission value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
12
): 84 dB (A)
pA
): 95 dB (A)
WA
): 87 dB (A)
pA
): 98 dB (A)
WA
ENG900-1
2
): 6.5 m/s
h,AG
2
2
): 6.0 m/s
h,AG
2
2
): 2.5 m/s or less
h,DS
2
2
): 7.0 m/s
h,AG
2
2
): 6.0 m/s
h,AG
2
2
): 2.5 m/s or less
h,DS
2
2
): 7.5 m/s
h,AG
2
2
): 6.0 m/s
h,AG
2
2
): 2.5 m/s or less
h,DS
2
ENG902-1
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.