Table of Contents
Advertisement
PCIe PLL SSC
Select Enabled for PCH PCIe Spread Spectrum Clocking support, which will allow the BIOS
to monitor and attempt to reduce the level of Electromagnetic Interference caused by the
components whenever needed. The options are Enable and Disable.
Server ME (Management Engine) Configuration
This feature displays the following system ME configuration settings.
•
General ME Configuration
•
Oper. (Operational) Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1/ME Firmware Status #2
•
Current State
•
Error Code
•
Suppress PTT Commands
Suppress PTT Commands (Available when PTT Support is set to Enable.)
Select Enable to bypass TPM2 commands and submit the system to the PTT (Platform Trust
Technology) Firmware.
PCH SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Enable and Disable.
Configure SATA as (Available when SATA Controller is set to Enable)
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID. (Note: This item is hidden when the SATA Controller item is set to Disabled.)
93
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
