Supermicro X11DSF-E User Manual page 120

Hide thumbs Also See for X11DSF-E:
Table of Contents

Advertisement

Super X11DSF-E User's Manual
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are Do Nothing and Erase Immediately.
BMC Network Configuration
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes upon next system boot.
The options are No and Yes. If this option is set to Yes, the following items will display:
Configure IPv4 Support
IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is
Failover.
IPMI Network Link Status: This feature displays the IPMI Network Link status. The default
setting is Dedicated LAN.
Configuration Address Source: Use this feature to select the IP address source for this
computer. If Static is selected, you will need to know the IP address of this computer and
enter it to the system manually in the field. If DHCP is selected, AMI BIOS will search for a
DHCP (Dynamic Host Configuration Protocol) server attached to the network and request
the next available IP address for this computer. The default setting is DHCP.
Station IP Address: This feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 172.31.61.41).
Subnet Mask: This feature displays the sub-network that this computer belongs to. The
value of each three-digit number separated by dots should not exceed 255.
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
Gateway IP Address: This feature displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 172.31.0.1).
VLAN: This feature displays the status of VLAN support. The default setting is Disabled.
Configure IPv6 Support
IPv6 Address Status: This feature displays the IPv6 address status. The default setting is
Disabled.
120

Advertisement

Table of Contents
loading

Table of Contents