Advertisement
Available languages
Available languages
SAP11
1.
Standby icon.
2.
Fan speed icon.
3.
Fan speed indicator.
4.
Ionizer indicator.
5.
Filter replacement indicator.
Air Purifying
1. In order to switch the device on, press the standby icon.
2. Fan speed can be adjusted by pressing fan speed icon.
3. Press and hold fan speed icon to enter night mode, the device will operated on lowest fan speed setting
and only standby icon will be lighted. Press any icon to return to normal mode.
4. If the device is switched on, ionizer icon is illuminated and a negative ion generator is operating as well.
5. In order to switch the device off, press standby icon, the device will stop operating.
6. Filter replacement indicator will start flashing when filter has to be replaced. Follow instructions enclosed in
"Filter replacement" section to replace the filter.
7. Temperature and humidity indicator displays current temperature and level of humidity.
Cleaning and maintenance
Do not submerge the device in water. Regularly wipe the device over with a damp cloth, and then wipe it dry.
HEPA filter+ activated carbon filter should not be cleaned with water. Use a vacuum cleaner or soft brush in
order to clean the filter.
If the device operates in normal conditions, filter should be replaced after 6 months. If the environment is
highly polluted, filter should be changed more frequently.
Filter replacement:
1. Turn the device upside down.
2. Turn the bottom filter cover in left direction (anti-clockwise).
3. Take the cover off.
4. Take out the old filter.
5. Unpack the new filter.
6. Install the new filter.
7. Close the cover by turning it in the right direction (clockwise).
6.
Temperature and humidity indicator.
7.
HEPA filter+ activated carbon filter.
8.
Filter cover with air inlets.
9.
Air outlets.
10. Power socket.
7
Advertisement
