Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight
can severely damage it.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the
Do not remove the cover or attempt to service this unit yourself. An authorized technician should
perform servicing of any nature.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD
monitor outside this range may result in permanent damage.
Immediately unplug your monitor and call an authorized technician if any of the following
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
monitor AC Power cable
Attaching the monitor to the base
Remove the monitor base from the packaging and place it on a stable and level workspace.
Remove the monitor from the packaging.
Attach the the monitor stand arm to the base.
Ensure that the base is locked onto the monitor stand arm. (for selected models)
Secure the base to the monitor stand arm by turning the white screw using the integrated tab
or a suitable coin. (for selected models)
Connecting your monitor to a computer
Connect the Audio Cable
Connect one and of the adapter to the monitor and the other and to
a properloy grounded,AC outlet.
Plug the power cords of your computer and your monitor into
a nearby electrical outlet .
Minus / Plus
Turns the monitor on/off.
indicates standby/power saving mode.
If the OSD is active, press the Minus or Plus buttons to toggle
between the OSD options.
Press to view the OSD. Press again to enter a selection in the OSD.
If the OSD is active, press Auto to exit the OSD. Once the OSD is
inactive, press Auto and the monitor will automatically optimize
the display position, focus, and clock of your display.
Press the Empowering Key to open the Acer eColor Management
OSD and access the scenario modes.
HDMI 2 HDMI 1
indicates power on. Amber