Table of Contents
Advertisement
2
Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated above
and the positions of the vane are as Figure 2 below. When the air conditioner is stopped using remote control,
the vane will shift to close position.
12.2.2 Horizontal Airflow
1
Automatic horizontal airflow direction can be set using remote control; the vane swings left and right within
the angles as stated below. It does not swing during fan motor stop. For heating mode operation, the angle of
the vane depends on the indoor heat exchanger temperature as Figure 1 below.
Heating, with heat exchanger temperature
Cooling and Soft Dry
2
Manual horizontal airflow direction can be set using remote control; the angles of the vane are as stated
below and the positions of the vane are as Figure 2 above.
Pattern
Airflow Direction
Patterns at Remote
Control
Vane Angle (°)
Operation Mode
1
2
90
70
39
Vane Angle (°)
A
68 ~ 115
B
90
68 ~ 115
3
4
80
100
5
110
Advertisement
Table of Contents
