Advertisement
Advanced setup (ZNS-GIT IPAdmin Tool)
ZNS‐GIT IPAdminTool is a utility program for IP products. Following list shows a part of features that ZNS‐GIT
IPAdmin Tool provides.
Configure IP address, Subnet mask and Gateway
Shows network related information such as MAC address
Updates firmware
Reboots the device
ZNS‐GIT IPAdmin Tool is provided with SDK at the following SDK path.
{SDK root}\BIN\TOOLS\AdminTool\
Rebooting
Reset can be carried out as follows:
1. While the device is in use, press and hold the Reset.
2. Release the Reset button after 3 seconds.
3. Wait for the system to reboot.
Resetting to the Factory Default Settings
This will reset all parameters, including the IP address, to the Factory Default initialization.
To perform the Factory Default settings:
1. Disconnect the power supply from the device.
2. Connect the power to the device with the Reset button pressed and held.
3. Release the Reset button after 5 seconds.
4. Wait for the system to reboot.
More Information
To learn more about using other features of your devices, refer to the manual, which is available on the SDK at
the following path.
{SDK root}\DOC\
2010/2‐1
5
Advertisement
