Advertisement
Step4. Setting IP Address
To set up the Network configuration:
1.
Click Setup on the upper right of the web page. The login page is displayed as below.
2.
Enter the default user name (root) and the default password (pass), and then select OK.
3.
Click System Options, and then select TCP/IP from the drop‐down menu.
To change the IP address, please make sure to check and have the correct Subnet mask and Gateway ready. To
use DHCP, select Obtain an IP address via DHCP.
To learn how to set up the web page for advanced configuration, refer to the Web Page User's Manual, which
is available on the SDK at the following path.
{SDK root}\DOC\
2010/2‐1
The default username
and password are:
root and pass.
4
Advertisement
