Page 1 User Guide This is a 「User Guide」 installed on the TV. The contents of this guide are subject to change without prior notice for quality improvement.
Page 2 ❐ ❐ To❐view❐programme❐information Displays information on current programme and / or current time, etc. 1 Move the pointer of the Magic remote control to the top of the TV screen. 2 Click the activated channel banner area. 3 The programme details will be displayed at the bottom of the TV screen. ✎...
Page 3: To❐Use❐Favourite
To❐set❐favourite❐programmes ❐ ❐ SMART❐ ❐➾ Settings❐➙ SETUP❐➙ Programme❐Edit 1 Move to the desired programme and press Wheel (OK) button. Programme is selected. 2 Press Set as Favourite. 3 Select the desired Favourite Pr. Group. 4 Select OK. Favourite is set. To❐use❐Favourite ❐ ❐ SMART❐ ❐➾❐Pr.❐List Programme list will appear. Selects the desired preset favourite programme from Favourite List A to D.
Page 4 SMART ➾ TV Guide [In Digital Mode Only] Obtains information about programmes and airing times. Obtains programme information and schedules viewing / recording. [Image shown may differ from your TV.] TV Guide OO OO. OOOO AM 9:00 Today Press Wheel (OK) button after moving to a programme of your choice to view or view / record.
Page 5: Automatically❐Setting❐Up❐Programme
Automatically❐Setting❐Up❐Programme ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Auto❐Tuning Automatically tunes the programmes. 1 Select Country where the TV is used. Programme settings change depending on the country you choose. 2 Initiate Auto Tuning. 3 Select Input Source of your choice. 4 Set Auto Tuning following screen instructions. ✎...
Page 6 ❐ ❌ Cable❐DTV❐Setting❐option When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as “default”. Frequency Enter a user-defined frequency.
Page 7 ❐ ❌ Satellite❐Setting❐Option❐ Satellite Select your desired Satellite. [Depending on country] Select one value from 9750/10600, 9750/10750, 9750, 10600,10750, 5150, MDU1, MDU2, MDU3, MDU4, MDU5. LNB Frequency If you select 9750/10600, 9750/10750(MHz), 22KHz Tone is disabled. If you cannot find the LNB frequency value from the list, select User and manually enter the frequency.
Page 8 To enable the power supply for the LNB, select On. If you LNB Power select Off, Motor Type is disabled. When using DiSEqC, select one option from A~D/ToneA~B. DiSEqC If you use DiSEqC, Unicable and Motor Type are disabled. Select On to use Unicable and set the Unicable in the Unicable Settings Unicable Setting menu.
Page 9 ✎ If you set satellite to others, you must add a transponder using Manual Tuning. ✎ When selecting 22KHz Tone and DiSEqC, you must connect them in the same position as displayed on the OSD. ✎ If you delete a Satellite, all programmes stored in the Satellite are deleted.
Page 10 ❐ ❌ Motor❐Setting❐Option❐ • DiSEqC 1.2 : Control motor to change satellite dish position. Drive Direction Select the direction in which you want to move the motor. Two modes are available : Step and Continuous. • Step : The motor moves based on the value you enter Drive Mode (from 1 to 128).
Page 11 Set the motor movement to east or west to have the motor move only within the direction set. Set Limit • On : You can limit the movement to the current direction by selecting the West/East. • Off : You can cancel the limit you set. Go To Zero You can move the motor to Zero.
Page 12: Cable❐Dtv❐Setting
Cable❐DTV❐Setting ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Cable❐DTV❐Setting [If the program mode is set to Cable] Service Operator. Service Operator When changing Service Operator, the existing saved programmes are deleted and Auto Tuning runs. • : You can update information for all the programmes that can be updated, including the programme currently Channel Auto being watched.
Page 13 ✎ The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country. ✎ If number of supported Service Operator for each country is 1, corresponding function becomes inactive. ✎...
Page 14: Satellite❐Setting
Satellite❐Setting ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Satellite❐Setting [If the programme mode is set to Satellite] You can add/delete/set the satellite you want.
Page 15: Tivu❐Programme❐List❐Update
Tivu❐Programme❐List❐Update❐ ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Tivu❐Programme❐List❐Update [Only Italy] [If the programme mode is set to Satellite] It updates the changed Programme List information by based on country broadcasting circumstance and satellite. It updates the Programme List when the TV turn off all the time. After updates, the Programme List may be changed.
Page 16 Programme❐List❐Update❐❐ ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Programme❐List❐Update [If the programme mode is set to Satellite] It updates the changed Programme List information by based on country broadcasting circumstance and satellite. It updates the Programme List when the TV turn off all the time. After updates, the Programme List may be changed.
Page 17 Regional❐Programme ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Regional❐Programme [Only Austria] [If the programme mode is set to Satellite] Set region broadcasting and watch region broadcasting at a specific time. ✎ To set Service Operator of Satellite, AKTIV must be selected.
Page 18: Transponder❐Edit
Transponder❐Edit ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Transponder❐Edit [If the programme mode is set to Satellite] You can add/modify/delete a transponder. ✎ If Country is set to Russia, press the Register as Home TP button on the screen to set the desired transponder to Home.
Page 19 To❐use❐Manual❐Tuning ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Manual❐Tuning Adjusts programmes manually and saves the results. For digital broadcasting, signal strength and signal quality can be checked. ✎ You can also adjust the frequency (KHz) Bandwidth.
Page 20 To❐edit❐programmes ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SETUP❐➙❐Programme❐Edit Edits the saved programmes. Set as favourite programme, block/unblock programme, skip programme etc. of the selected programme.
Page 21 SMART ➾ Settings ➙ SETUP ➙ Programme Mode This function allows you to watch a tuned program in Antenna, Cable, Satellite, or CAM Mode. ✎ You can only watch programs in the selected mode. ✎ The CAM menu is only available when the CAM Mode is enabled. The menu name may vary depending on the CAM type.
Page 22 (Magic Remote Control) ➾ (Screen Remote Control) (or press the TEXT button.) [Depending on country] Teletext is a free service provided by the TV station that offers text-based information about TV programmes, news and weather. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
Page 23: Special Teletext Function
Special Teletext Function ❐ (Magic Remote Control) ➾ (Screen Remote Control) (or press the T. OPT button.) Select the Text Option menu. ꔻ Index Select each index page. When viewing a TV programme, select this menu to display the ꔾ Time time at the top right hand corner of the screen.
Page 24 Select this menu to display concealed information, such as ꔽ Reveal solutions to riddles or puzzles. Displays the TV picture on the screen while waiting for a new ꔼ Update teletext page. [In Digital Mode Only] Language Sets Teletext language.
Page 25 (Magic Remote Control) ➾ (Screen Remote Control) (or press the TEXT button.) [In UK/Ireland only] The TV gives you access to digital teletext which gives much better text, graphics etc. than older analogue teletext. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.
Page 26: Teletext Within Digital Service
❌ Teletext within digital service 1 Press the numeric or ꔵ button to select a certain service which broadcasts digital teletext. 2 Follow the indications on digital teletext and move onto the next step by pressing (Magic Remote Control), TEXT, Navigation, Red, Green, Yellow, Blue or NUMBER buttons etc..
Page 27: Teletext In Digital Service
❌ Teletext in digital service 1 Press the numeric or ꔵ button to select a certain service which broadcasts digital teletext. 2 Press the TEXT or colour button to switch on teletext. 3 Follow the indications on digital teletext and move onto the next step by pressing (Magic Remote Control), Navigation, Red, Green, Yellow, Blue or NUMBER buttons etc..
Page 28 To❐Set❐MHP❐Auto❐Start ❐ ❐ SMART❐ ❐➾❐Settings➙❐OPTION❐➙❐MHP❐Auto❐Start [Depending on model] [In Italy only] This function Auto Starts the MHP function, Italian data broadcast. Use in programme with MHP signal. Data broadcast function may not be smooth due to situation from the broadcasting station. ✎...
Page 29: What❐Is❐Hbbtv
What❐is❐HbbTV? ❐ ❐ [Depending on model] [Depending on Country] The HbbTV or Hybrid Broadcast Broadband TV replaces existing analogue teletext services with a new-generation, web-based interactive broadcasting service. Similar to digital text and EPG, HbbTV can be used to provide a variety of services in addition to standard broadcast content.
Page 30 To❐use❐HbbTV ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐HbbTV❐❐ Sets HbbTV to On. Enjoy a variety of content on the HbbTV service. ✎ The service may be limited when the device is not connected to the internet. ✎ You can control HbbTV using the direction keys, and point and click function of the Magic Remote Control are not supported.
Page 31 SMART ➾ Settings ➙ OPTION ➙ Data Service [Depending on country] This function allows users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
Page 32 SMART ➾ Settings ➙ SETUP ➙ CI Information • This function enables you to watch some encrypted services (pay services). • If you remove the CI Module, you cannot watch pay services. • CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances. • When the module is inserted into the CI slot, you can access the module menu. • To purchase a module and smart card, contact your dealer.
Page 33 • When the TV is turned on after inserting a CI Module, you may not have any sound output. The Smart Card may not be compatible with the CI module. • When using a CAM(Conditional Access Module), please make sure it meets fully the requirements of either DVB-CI or CI plus. • An abnormal process of CAM(Conditional Access Module) may cause a bad picture. • [Depending on model] If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator.
Page 34 SMART ➾ Settings ➙ PICTURE ➙ Aspect Ratio Selects the screen aspect ratio. 16:9 Resizes images to fit the screen width. Displays video images in the original size without removing parts of the edge of the image. Just Scan ✎ In DTV/HDMI/Component (over 720p) mode, Just Scan available.
Page 35 When TV receives the wide screen signal, it will let you adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. Full Wide 4:3 and 14:9 video is supported in full screen without any video distortion through DTV input.
Page 36 ✎ While viewing an external device, these cases may result in image burn: - a video with stationary caption (such as network name) - 4 : 3 aspect ratio mode for an extended period Take caution when using these functions. ✎...
Page 37 SMART ➾ Settings ➙ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. Turns off Energy Saving mode. Minimum / Medium / Applies the pre-set Energy Saving mode. Maximum Screen is turned off and only sound is played. Screen Off Press any button except Power button on the remote control to turn the screen back on.
Page 38 SMART ➾ Quick Menu ➙ AV Mode Sets the best picture / audio optimized for different AV modes. Operates with the value set in the picture / sound menu. Cinema Optimizes picture and audio settings for movies. Game Optimizes picture and audio settings for games.
Page 39 To❐adjust❐pictures❐with❐Picture❐Wizard ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Wizard❐Ⅱ Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for optimum picture quality without expensive pattern devices or help from a specialist. Follow the instructions to obtain the optimum picture quality.
Page 40 To❐select❐Picture❐Mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Mode Selects the picture mode optimized for the viewing environment or the programme. Heightens contrast, brightness and sharpness to Vivid display vivid images. Displays images in standard levels of contrast, Standard brightness and sharpness. The Energy Saver feature changes settings on the TV to reduce power consumption.
Page 41 Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu is ISF-certified and provided for picture tuning experts. ꕋ Expert (ISF logo can only be used on ISF-certified TV units.) ISFccc : Imaging Science Foundation Certified Calibration Control ✎...
Page 42 To❐fine-tune❐picture❐mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Backlight❐/❐ Contrast❐/❐Brightness❐/❐Sharpness❐/❐Colour❐/❐Tint❐/❐Colour❐Temp. First select a Picture Mode of your choice. Adjusts the display brightness by varying the brightness of Backlight the LCD panel. Adjusts the difference between bright and dark regions of the Contrast screen. Brightness Adjusts the overall screen brightness.
Page 43 Colour Adjusts the colours on the screen darker or lighter. Tint Adjusts the red/green colour balance. Colour Temp. Adjusts the overall tone of colours to warm or cool. ✎ Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.
Page 44 To❐set❐advanced❐control ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Advanced❐ control/Expert❐Control❐ Calibrates the screen for each picture mode or adjusts picture settings for a special screen. First select a Picture Mode of your choice. Adjusts the contrast to the optimal level according to the Dynamic Contrast brightness of the image.
Page 45 Skin Colour : Skin colour spectrum can be separately set to implement the skin colour as defined by the user. Preferred Colour Grass Colour : Natural colour spectrum (meadows, hills, etc.) can be separately set. Sky Colour : Sky colour is set separately. Provides a crystal-clear picture by improving the details in Super Resolution areas where the picture is blurry or unclear.
Page 46 Filters a specific colour spectrum in RGB colours to fine- Colour Filter tune colour saturation and hue accurately. Expert Pattern Patterns used for expert adjustment. Adjusts the overall tone of the screen as desired. White Balance In Expert mode, detailed fine-tuning can be set via the Method / Pattern etc.
Page 47 To❐set❐additional❐picture❐options ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Picture❐Option Adjusts detailed setting for images. Noise Reduction Reduces screen noise in the video. MPEG Noise Reduces noise caused by compressing digital video. Reduction Adjusts the brightness or darkness of the screen to suit the Black Level black level of the picture input using the degree of darkness (black level) of the screen.
Page 48 [Depending on model] Eye Care Adjusts screen brightness to prevent eye glare. [Depending on model] Saves power consumption by adjusting the brightness corresponding to the movement of the image on the Motion Eye Care screen. ✎ It does not work while watching 3D images. ✎...
Page 49 To❐reset❐Picture❐Mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Picture❐Reset Resets values customized by the user. Each picture mode is reset. Select the picture mode you wish to reset.
Page 50 SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ TruMotion [Depending on model] Corrects images to display smoother motion sequences. Smooth De-Judder / De-Blur value is set to 3. Clear De-Judder / De-Blur value is set to 7. The screen appears clearer when Clear is selected.
Page 51 SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ LED Local Dimming Brightens bright areas and darkens dark areas of the image for maximum contrast and minimum blur while reducing power consumption. [Depending on model] Turns off LED Local Dimming. Expresses natural black tones.
Page 52 To❐use❐Sound❐Mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐SOUND❐➙❐Sound❐Mode Optimizes TV audio to the selected sound mode. Standard Suitable for all types of video. Music / Cinema / [Depending on model] Sport / Game Sets audio optimized for a specific genre. Adjusts the volume to a level of your choice using the User Setting User...
Page 53 To❐fine-tune❐the❐volume ❐ ❐ SMART❐ ❐➾ Settings❐➙❐SOUND❐➙❐Sound❐Mode❐➙❐User❐EQ Sets Sound Mode User Setting first. 100 Hz / 300 Hz / 1 kHz / Sets EQ by manual adjustment of sound bands. 3 kHz / 10 kHz Reset Resets the equalizer value changed by the user.
Page 54 To use Smart Sound Mode ❐ SMART ➾ Settings ➙ SOUND ➙ Smart Sound Mode Provides the optimized sound adjusted for each content type. ✎ If the Smart Sound Mode function is enabled, Sound Mode, Virtual Surround Plus Clear Voice ll are automatically adjusted.
Page 55 SMART ➾ Settings ➙ SOUND ➙ Virtual Surround plus LG’s proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. ✎ If Clear Voice ll is set to ON, Virtual Surround plus will not be chosen. To use Clear Voice ll function ❐...
Page 56 To set Volume Mode ❐ SMART ➾ Settings ➙ SOUND ➙ Volume Mode Sets various modes for volume control. Sets Auto Volume Different volume outputs from programme to programme. They are then automatically Auto Volume adjusted for convenient TV watching, when clicking through different programme.
Page 57 To synchronize audio and video ❐ SMART ➾ Settings ➙ SOUND ➙ AV Sync. Adjust Synchronizes video and audio directly when they do not match. If you set AV Sync. Adjust you can adjust the sound output (TV speakers or SPDIF) to the screen image. [Depending on model] Adjusts the synchronization of the sound from the TV's internal TV Speaker...
Page 58 The "-" button makes the sound output faster and the "+" Speaker button slower than the default value. ✎ LG audio device is supported only for models with the optical digital port. Outputs broadcasting signals or the audio of an external Bypass device without audio delay.
Page 59 To use Sound Option Setting ❐ [Depending on model] SMART ➾ Settings ➙ SOUND ➙ Sound Option Setting ❌ Analogue Out [Depending on model] Allows the user to select the Headphone External Speaker (Audio Out) menu depending on the device connected. ❌...
Page 60 ❌ Sound Optimizer [Depending on model] Allows optimized sound for custom TV installation. Normal General sound mode. Wall Mount Type Optimizes sound for a wall-mounted TV. Stand Type Optimizes sound for a stand-mounted TV.
Page 61 To use TV’s speakers ❐ [Depending on model] SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ TV Speaker Sound is output through the TV speaker. To use External Speaker ❐ SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ External Speaker (Optical/HDMI ARC) [Only available for models with an optical or HDMI (ARC) port]...
Page 62 To use Digital Sound Out ❐ SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ External Speaker(Optical/HDMI ARC) ➙ Digital Sound Out Sets up Digital Sound Output. Item Sound Input Digital Sound output MPEG Auto Dolby Digital Dolby Digital Dolby Digital Plus Dolby Digital...
Page 63 To connect and use LG audio device ❐ LG audio device allows you to enjoy rich powerful sound easily. ❌ Wired Connection SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ LG Sound Sync (Optical) Connect LG audio device with the logo to the optical digital audio output port.
Page 64 ✎ When wirelessly connecting, attach the dongle and connect it if the model needs the Magic Remote Control dongle. (AN-MR400, sold separately) ✎ For wireless connection, if the device fails to connect. Check the device power to connect and if the LG Audio device is in a proper operating condition.
Page 65 ✎ If two or more devices are detected, the first detected device is connected first. To view more detected devices to connect, press the Show More button. ✎ If LG Sound Sync (Wireless) is being selected and you turn on the TV, it search and try to connect the device which recently connected.
Page 66 Settings ➙ SOUND ➙ Sound Out ➙ LG Sound Sync (Wireless) Sound output is through the Bluetooth headset. ✎ The devices that can be connected are: LG BTS1, LG HBS-700, LG HBS-730, LG HBS-800 (Product availability may vary by country.)
Page 67 Magic Remote Control dongle. (AN-MR400, sold separately) ✎ For wireless connection, if the device fails to connect. Check the device power to connect and if the LG Audio device is in a proper operating condition. ✎ If two or more devices are detected, the first detected device is connected...
Page 68 To use Analogue Out/Headphone ❐ [Depending on model] SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ External Speaker (Audio Out) Headphone Select Headphone External Speaker (Audio Out) depending on the device connected to set the analogue out. ✎ The available menu may vary depending on whether you select Headphone External Speaker (Audio Out) Sound Option Setting...
Page 69 DTV Sound Setting ❐ SMART ➾ Settings ➙ SOUND ➙ DTV Sound Setting [Depending on model] When different audio types exist in an input signal, this function allows you to select the audio type you want. If set to AUTO the search order is Dolby Digital+ →...
Page 70 To❐select❐an❐external❐input ❐ ❐ SMART❐ ❐➾ Input❐List Selects external input. INPUT❐LIST Select❐an❐input❐device❐to❐view. Selects speaker. TV Speaker Selects input. Antenna HDMI1 HDMI2 DLNA Sets the Programme mode. Change Device Name SIMPLINK Setting Set the Universal Control Programme Mode [Depending on country] Edits the name of external device connected to Sets OSS.
Page 71: To❐Use❐Simplink
To❐use❐SIMPLINK ❐ ❐ SIMPLINK is a feature that enables you to control and manage various multimedia devices conveniently using the TV remote control only via the SIMPLINK menu. 1 Connect the TV's HDMI IN terminal with the SIMPLINK device's HDMI output terminal using an HDMI cable.
Page 72 ✎ This function only works on devices with the SIMPLINK logo ( Verify that the external device has a SIMPLINK logo. ✎ To use the SIMPLINK function, you need to use a high-speed HDMI cable Ⓡ (with CEC, or Consumer Electronics Control, feature added). High-speed HDMI cables have the No.
Page 73 ❐ ❌ Explanation❐of❐SIMPLINK❐features❐❐ Direct Play Plays the multimedia device on the TV instantly. Select Selects the desired device via the SIMPLINK menu to multimedia control it from the TV screen instantly. device Manages the multimedia device with the TV remote Disc playback control.
Page 74 If the Auto Power function is set to On in the SIMPLINK Sync Power on settings, turning on a SIMPLINK device will turn the TV on. Speaker Selects speaker either on the home theatre unit or the TV.
Page 75 To❐use❐Sleep❐Timer ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐TIME❐➙❐Sleep❐Timer Turns off the TV after a preset number of minutes. To cancel the Sleep Timer, select Off.
Page 76 To❐set❐current❐time ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐TIME❐➙❐Clock Checks or changes the time while watching TV. Synchronizes the TV clock to the digital time information sent by Auto the TV station. Sets the time and date manually if the auto setup does not Manual correspond to the current time.
Page 77 To❐set❐the❐TV❐to❐turn❐on❐and❐off❐automatically ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐TIME❐➙❐On❐Time/Off❐Time Sets On/Off time. Select Repeat to discontinue On Time/Off Time. ✎ To use On Time/Off Time, set the current time correctly. ✎ Even when the On Time function is on, the TV will turn off automatically in 120 minutes when no button is pressed within that time.
Page 78 To❐set❐Automatic❐Standby ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐TIME❐➙❐Automatic❐Standby [Depending on model] If you do not press any button on the TV or remote control for a certain period, the TV will automatically switch to standby mode. ✎ This function does not work on Store Demo mode or while software update.
Page 79: To❐Set❐Password
To❐set❐password ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐LOCK❐➙❐Set❐Password Sets or changes TV password. ✎ The initial password is set as 「0000」. When France is selected for Country, password is not 「0000」 but 「1234」. When France is selected for Country, password cannot be set as 「0000」.
Page 80 To❐lock❐system ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐LOCK❐➙❐Lock❐System Permits only specific programmes by blocking channels or external input. Select the Lock System to On. Blocks the programmes that contain inappropriate contents for Block children. The programmes can be selected but the screen is Programme blank and the audio is muted.
Page 81 This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. Parental Prevents children from watching certain adult’s TV Guidance programmes, according to the ratings limit set. Enter a password to watch a blocked programme. Rating differs by country.
Page 82 SMART ➾ Settings ➙ OPTION ➙ Language(Language) Selects Menu Language and Audio Language displayed on the screen. Menu Language Selects a language for the display text. [In Digital Mode Only] Audio Language When watching a digital broadcast containing several audio languages, you can select the language you want.
Page 83 [In Digital Mode Only] Use the Text language function when two or more Text languages are broadcast. ✎ If teletext data in a selected language is not broadcast, Text Language the default Text language will be displayed. ✎ If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation.
Page 84 SMART ➾ Settings ➙ OPTION ➙ Country [Depending on country] Sets the country that the TV uses. TV settings are changed according to the broadcast environment of the selected country. ✎ If the country setting is changed, the Auto Tuning information screen may appear.
Page 85 SMART ➾ Settings ➙ OPTION ➙ Disability Assistance Audio commentary or subtitles are provided for those who are hard of hearing or visually impaired. This function is used for the hearing impaired. Hard of Hearing If it is set to on, the subtitle is displayed by default. This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in Audio...
Page 86: To❐Register❐The❐Magic❐Remote❐Control
To❐register❐the❐Magic❐Remote❐Control ❐ ❐ To use the Magic Remote Control, register it with your TV first. Register Magic Remote Control as follows before use. 1 Turn on the TV and wait for about 10 seconds and then press Wheel(OK) button while pointing the remote control at the TV. 2 The remote control is automatically registered and the registration completion message appears on the TV screen.
Page 87: To❐Re-Register❐The❐Magic❐Remote❐Control
To❐re-register❐the❐Magic❐Remote❐Control ❐ ❐ SMART❐ 1 Press the BACK buttons together for about 5 seconds. 2 Press the Wheel (OK) button towards the TV to re-register the Magic Remote Control. SMART❐ ✎ Press the button and BACK button at the same time, for five seconds, to reset the Magic Remote Control.
Page 88 To❐set❐the❐pointer❐of❐the❐Magic❐Remote❐Control ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Pointer Sets the speed and shape of the pointer that appears on the TV screen. Speed Sets the moving speed of the pointer. Shape Selects a pointer shape from various options. Size Chooses the size of the pointer. Set to On.
Page 89 ✎ If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote Control to the right and left. Then, it appears again. ✎ If you press the Navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a common remote control.
Page 90 ✎ Electronic devices nearby may cause communication interference. Devices such as microwave ovens and wireless LANs use the same frequency range (2.4 GHz) as the Magic Remote Control and may cause interference. ✎ The Magic Remote Control may be broken if dropped or damaged in any other way.
Page 91 To❐use❐the❐pattern❐gesture❐function❐ ❐ ❐ Press the Wheel(OK) button with the normal video screen on and draw a pattern toward the screen. Previous channel: Moves back to the previous channel. Recent list: Shows channels recently watched. Shows channel lists which be related to pattern. Choose the channel.
Page 92 To❐set❐Power❐Indicator ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Standby❐Light [Depending❐on❐model] Turns the standby light in the front panel of the TV on/off.
Page 93 To❐adjust❐the❐front❐LG❐Logo❐Light ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐LG❐Logo❐Light [Depending❐on❐model] You can adjust the LED brightness of the LG logo at the bottom of the TV. You can set the brightness of LG Logo Light to Off/Low/ Brightness Medium/High when the TV power is off.
Page 94 You can set the off time of LG Logo Light when the TV power is on. • Off right now : The light is turned off as the TV power is When TV is on • Off after 10 min : The light is turned off after 10 minutes when the TV power is on.
Page 95 To❐change❐TV❐mode ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Mode❐Setting Selects Home Use Store Demo. For use at home, select Home Use. Store Demo is a mode used for store display.
Page 96 To❐return❐to❐initial❐settings ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Factory❐Reset Deletes all optional settings and returns to initial default mode. Once initialization is complete, the TV will turn off and on by itself. ✎ If Lock System is activated, a pop-up password prompt will appear. ✎...
Page 97: To❐Use❐Home❐Screen
Select a card that you want News Sports Viral Video -1 MBC HD July 4 8:30 pm to use. Monster Ghost Abata Photo Game Thanks My Boy More My Apps Input List Settings Internet Search Photos Smart Sh... LG Smart... Game Wo... User Guide Pr.List...
Page 98 To❐use❐and❐edit❐MY❐CARD ❐ ❐ SMART❐ ❐➾❐MY❐CARD To enable you to easily check and access a wide variety of content and functions, the main functions are grouped into categories and displayed on cards. By selecting the card name, you can go to that category page. Select Edit at the top of the home screen to switch the position of the cards or...
Page 99: To❐Use❐My❐Apps
Select More to check apps pre-installed apps and apps you have downloaded. More Input List Settings Internet Search Photos Smart Sh... LG Smart... Game Wo... User Guide Pr.List Select the app you want to run.
Page 100: To❐Edit❐Items❐In❐My❐Apps
To❐edit❐items❐in❐My❐Apps ❐ ❐ SMART❐ ❐➾❐More❐➙My❐Apps❐➙❐Edit On the My Apps page, select Edit at the top of the screen to move or delete apps. Please note that system apps can be moved, but cannot be deleted. ✎ Changes orders / deletes items by dragging the app icons if your device has a Magic Remote Control.
Page 101: One-Click❐Network❐Connection
A wireless or wired network connection is required to use Smart features. When connected to the network, you can use Premium content, LG Smart World, DLNA and more. One-click❐network❐connection ❐ ❐ Connects easily to a wired/wireless network. SMART ➾ Settings ➙...
Page 102: To❐Connect❐To❐A❐Network❐Through❐Set❐Expert
To❐connect❐to❐a❐network❐through❐Set❐Expert ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐NETWORK❐➙❐Network❐Connection For use in special circumstances such as in offices (in cases where a static IP is used). 1 Select a network connection, either Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods.
Page 103 Connects easily when the button of a wireless AP supporting WPS-PBC PBC is pressed. Connects easily when the PIN of the wireless AP that you WPS-PIN wish to connect to is entered in to the AP website.
Page 104: To❐Use❐The❐Wi-Fi❐Direct❐Function
To❐use❐the❐Wi-Fi❐direct❐function ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐NETWORK❐➙❐Wi-Fi❐direct Wi-Fi Direct is a function that allows your TV to connect with a Wi-Fi Direct device without Internet connection. With SmartShare , you can watch the files stored on a device connected via Wi-Fi Direct. 1 Set Wi-Fi direct to On.
Page 105 To❐use❐the❐Miracast™/Intel’s❐WiDi❐function ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐NETWORK❐➙❐Miracast™/Intel’s❐WiDi You can view the screen of a device with Miracast™ Intel’s WiDi technologies on your TV. 1 Set Miracast™/Intel’s WiDi to On. (If you do not use it, please change it to Off.) 2 Enable the Miracast™/Intel’s WiDi settings on the device that you want to connect to.
Page 106 ✎ You may not connect your TV to a non-LG Electronics device even when it is detected. ✎ It is recommended you to connect a device to a 5GHz router.
Page 107 ✎ LG Electronics is not responsible for any network connection problems or any faults, malfunctions and errors caused by an network connection. ✎ A network connection may not work properly depending on the Internet...
Page 108 ✎ A DSL modem is required for a DSL service; a cable modem is required for a cable service. Only a limited number of network connections may be available, and TV network setting may not be available depending on your contract with your Internet Service Provider (ISP).
Page 109 ✎ For an AP connection, an access point device that supports wireless connection is required and the wireless connection feature must be enabled on the device. Contact your service provider regarding availability of wireless connection on your access point. ✎ Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation for SSID and security settings of the AP.
Page 110: What❐Is❐Tag❐On
What❐is❐Tag❐On? ❐ ❐ Tag On is a data transmission technology that can be used on smartphones with NFC (Near Field Communication). Simply by tapping your smartphone to a Tag On sticker, you can share content between your smartphone and TV. To connect your smartphone to the TV using Tag On, they must be connected on the same Wi-Fi network or Miracast™/Intel’s WiDi...
Page 111 ✎ Do not crumple or fold the Tag On sticker. Otherwise, the Tag On is not recognised ✎ To purchase a Tag On sticker, please contact the LG Electronics Service Centre. ✎ This function is supported only on a smartphone with Android 4.0 (ICS) or...
Page 112: To❐Start❐Tag❐On❐For❐The❐First❐Time
For more information on enabling NFC and setting the mode, refer to the owner's manual of your smartphone. 3 Tap your smartphone to a Tag On sticker. Make sure to follow the instructions on the smartphone screen and install the Tag On app and LG TV Remote app.
Page 113 4 Tap the smartphone to the Tag On sticker again. 5 Enter the pairing key displayed on the smart TV into the smartphone. When two or more TVs are detected, the pairing key is displayed only after the TV you want to connect to is selected in the device list. 6 When the connection is made properly, you can use Tag On.
Page 114 To❐use❐the❐Tag❐On ❐ ❐ Follow the steps below to share content on your NFC-enabled smartphone. 1 Tap the NFC-enabled smartphone to a Tag On sticker. 2 The Tag On app starts running on the smartphone to connect to the smart - To use a Wi-Fi network, make sure that the smart TV is on the same network as your smartphone.
Page 115 ✎ If the Tag On app is not installed, the installation page appears automatically. ✎ For more information on how to share content between your smartphone and TV, refer to the Tag On app's help. Click to run the Tag On app on your smartphone and select the Settings menu to view the help.
Page 116: To Connect A Usb Device
To❐connect❐a❐USB❐device ❐ ❐ Connect a USB storage device (external HDD, USB memory) to the USB port of TV to enjoy the content files stored in the USB device on your TV. To remove a USB storage device, select the Quick Menu ➙...
Page 117 Using❐a❐USB❐storage❐device❐-❐warning ❐ ❐ ✎ If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. ✎ Some USB storage devices may not work or may work incorrectly. ✎ If you use a USB extension cable, the USB device may not be recognized or may not work properly.
Page 118 ✎ It is recommended that you use USB memory sticks of 32 GB or less and USB HDDs of 2 TB or less. ✎ If a USB HDD with power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB HDD.
Page 119: To Use Smartshare
To use SmartShare™ ❐ SMART ➾ SmartShare™ Provides photo / music / video files on your TV by connecting to a USB device or home network (DLNA). ✎ Image shown may differ from your TV. SmartShare™ Recently Played Recent Video Displays photo / music / Photo video files on all devices...
Page 120: To Control Video Playback
To control video playback ❐ Controls playback and sets options while viewing videos. ✎ Image shown may differ from your TV. Selects the desired point and plays Option Sets options. Plays Changes to 3D mode.
Page 121: To Control Photo View
To control photo view ❐ Controls playback and sets options while viewing pictures in full screen. ✎ For 3D pictures, the Slide Show Effect does not work even when the Slideshow function is enabled. ✎ Image shown may differ from your TV. Option Displays photos as a Sets options.
Page 122: To Control Music Playback
To control music playback ❐ Controls playback and sets options while playing music. ✎ Image shown may differ from your TV. Selects the desired point and plays Sets options Listens to music with the monitor Plays Sets the repeat/random turned off. function.
Page 123 ✎ You can control playback using the ꕚ , ꕖ and ꕙ keys on a standard remote control. ✎ If you use the USB device, time information will be not shown on screen.
Page 124 To set SmartShare™ related functions ❐ SMART ➾ SmartShare™ ➙ Settings Changes settings related to SmartShare content playback. ❌ Advanced Setting Changes the name that appears when searching for the TV My TV Name from other devices. Network Status Checks the network connection. Allows use of wireless connection functions such as Wi-Fi Wi-Fi Direct direct and WiDi.
Page 125 Registers or releases DivX. Checks DivX Registration Code for playing DivX-protected videos. Register at http://vod.divx.com. Uses Registration Code to rent or purchase movies at www. divx.com/vod. DivX(R) VOD ✎ Rented/purchased DivX files cannot be played if the DivX Registration Code of a different device is used. Use only the DivX Registration Code granted to this device.
Page 126 ❌ Delete History To delete contents history, press Delete History button below. Use the contents Recent menu.
Page 127 SmartShare™ supporting file ❐ Maximum data transfer rate : • Full HD 1920 X 1080: 20 Mbps (megabits per second) • ULTRA HD [Depending on model] ULTRA HD Video 3840 X 2160 (H.264 L5.1) : 50 Mbps 3840 X 2160 (H.265 L5.0) : 25 Mbps...
Page 128 External subtitle formats supported : *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) Internal subtitle formats supported : • Full HD Video 1920 X 1080: XSUB (supports internal subtitles generated from DivX6) • [Supports only ULTRA HD model] ULTRA HD Video: It does not support internal subtitles.
Page 129 ❌ Video Supported Codec Maximum: • Full HD :1920 x 1080 @30p • ULTRA HD [Depending on model] : 3840 x 2160 @ 30p Extension Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profile .asf .wmv Audio WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Video Motion Jpeg, MPEG-4 Part 2...
Page 130 Extension Codec Video H.264/AVC, MPEG-4 Part 2 .3gp .3g2 Audio AMR-NB, AMR-WB Video H.264/AVC .mkv Audio Dolby Digital Video H.264/AVC, MPEG-2, VC-1 .trp MPEG-1 Layer I, II, MPEG-1 Layer III (MP3) Audio .mts Dolby Digital, Dolby Digital Plus .m2ts Video MPEG-1, MPEG-2 .vob Audio...
Page 131 ❌ Available music file File type Item Info Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2, Layer2, Layer3...
Page 132 ❌ Available photo file File type Item Profile Minimum: 64 x 64 Maximum: JPEG (jpeg, jpg, jpe) Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) Minimum: 64 x 64 3D(jps) Maximum: Normal Type: 15360 (W) x 8640 (H) 4:3 size 3648 x 2736 2592 x 1944...
Page 133 Playing video - warning ❐ ✎ Some subtitles created by users may not work properly. ✎ The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have the same name. ✎...
Page 134 ✎ [Supports only ULTRA HD model] ULTRA HD Video: 3840 X 2160 • It supports the playback through USB only. • ATTENTION: Your ULTRA HD TV may not support HEVC encoded contents that are not officially supplied by LG. • Unsupported codecs are only available after a software upgrade. Extension...
Page 135 ✎ The file size limit is dependent on the encoding environment. ✎ It works only the above version of Window Media Audio V2. ✎ Video files created by some encoders may not be played back. ✎ Video files in formats other than the ones specified here may not be played back.
Page 136: To❐Connect❐A❐Dlna-Authenticated❐Smartphone
DLNA stands for Digital Living Network Alliance, which allows you to enjoy video / music / photo files stored on a PC or server on your TV via home networking. To❐connect❐a❐DLNA-authenticated❐Smartphone ❐ ❐ The TV and the smartphone should be on the same network. 1 Ensure that Wi-Fi is enabled on the smartphone.
Page 137 To❐connect❐DLNA❐DMR❐(Digital❐Media❐Renderer)❐ ❐ ❐ If the PC's operating system is Windows 7 or Windows 8 or the DLNA-certified device (e.g. mobile phone) is connected via a network, you can play music / videos / photos on TV without installing a separate program. 1 Configure TV and PC on the same network.
Page 138 To❐connect❐DLNA❐DMP❐(Digital❐Media❐Player) ❐ ❐ With a PC having SmartShare PC Software, music / video / photo files may be replayed on the TV by linking them via home networking. 1 Configure TV and PC on the same network. The TV and each device should be connected through a single access point to enable DLNA service.
Page 139 ❐ ❌ In❐case❐of❐a❐DLNA❐malfunction ✎ If the DLNA feature does not work properly, check your network settings. ✎ A 5-GHz access point is needed to view 1080p videos via DLNA. A 2.4-GHz access point may cause frequent buffering or other problems. ✎...
Page 140 ✎ DLNA feature cannot be used with some access points that do not support multicasting. For more information, refer to the access point manual or consult the manufacturer. ✎ Supported file types may differ depending on DLNA server environment, even for file types supported by the TV.
Page 141 To❐use❐Premium ❐ ❐ SMART❐ ❐➾❐Premium This service gives you easy access to a wide variety of content, such as video, news and, UCC, at any time, as long as you are connected to the network. Premium content includes specialized country-specific services taking regional cultural sensitivities into account as well as global content.
Page 142: To❐Use❐Paid❐Content
LG Electronics’ proprietary billing system or through that of the relevant content provider. Before using the LG billing system, you will need to sign up for membership and register payment information on TV or the website (www.lgappstv.com) to purchase paid content.
Page 143 1 Click Sign In button on the upper-right side of the screen on the Home page to sign in. 2 Moves to the desired Premium service. (For some premium services, separate sign-in is required after signing up for the premium service.) 3 After reviewing the pricing and service information for the content, click the Purchase button.
Page 144: To❐Reset❐Premium
To❐reset❐Premium ❐ ❐ SMART❐ ❐➾❐Premium❐➙❐Option❐➙❐Initialisation❐of❐Premium Resets Premium list, Premium information, country setting and user sign-in information. Resetting will resolve errors occurring during Premium update.
Page 145 Refer to the website of the relevant content provider for questions, troubleshooting or the latest information about content. LG Electronics assumes no legal responsibility for content services and related information, even when a service is discontinued by the service provider.
Page 146: To Use Lg Smart World
[This function may not be applied some countries.] SMART ➾ LG Smart World LG Smart World is a TV application service available through Smart TV Service. You can download and enjoy various kinds of hot paid/free apps including education, entertainment, life and news. Sign in.
Page 147: To❐Sign❐Up❐With❐Lg❐Smart❐World
To❐sign❐up❐with❐LG❐Smart❐World ❐ ❐ SMART❐ ❐➾❐Sign❐In Sign up is required to download and run apps. 1 Select Sign Up and agree to Legal Notice. 2 Enter ID and password. 3 In Confirm Password box, enter password again. 4 Select to complete sign-up process.
Page 148 1 Click the Sign In button at the top of the home screen to log in. 2 Select the LG Smart World card. 3 Select an app you want from the list. 4 Check the details of the app, then select the Install button.
Page 149 ✎ You can purchase apps via PC or TV, but you must use the TV to install and run them. ✎ If you have insufficient storage space on your TV, you can download apps to a USB storage device connected through the TV's terminal for USB apps. Apps stored on USB can be run / deleted / moved from the My Apps screen.
Page 150: To❐Manage❐My❐Information
To❐manage❐my❐information ❐ ❐ SMART❐ ❐➾❐LG❐Smart❐World 1 Sign in. 2 Select the currently signed-in ID at the top of the screen. 3 Select Page. 4 Manages by examining Member Information, My Purchased Apps List and TV Installed Apps List.
Page 151 Shows basic information about the ID currently signed My Information in. To change your member information, visit www. lgappstv.com on your PC. Payment Inquiry Shows Payment History of the signed-in ID. Shows My Purchased Apps List for the signed-in ID. Purchased Apps You can delete/re-install the purchased apps.
Page 152 ➾ Search You can search apps and contents using the Search function of LG Smart TV. When you enter keywords using the input device, such as the remote control, you can find apps of LG Smart World and some contents of the Premium service.
Page 153: To Use The Voice Recognition Function
To use the voice recognition function ❐ ❌ Using this function through search 1 Go to SMART ➾ Search. Select the voice recognition icon ( ) on the left of the text field. 2 Speak slowly and clearly after the voice recognition window appears. 3 After the voice recognition is completed, the Similar List window pops up.
Page 154: Using This Function On The Internet
❌ Using this function on the Internet 1 Go to SMART ➾ Internet. Move the Magic Remote Control pointer in the text field on a website to open the virtual keyboard. 2 Select the voice recognition icon ( ) on the left of the text field on the virtual keyboard.
Page 155 ✎ You can use Voice Search when you press the Voice recognition( ) on the Magic remote control even if QWERTY keyboard is shown on your screen. ✎ Check the network connection before using the voice recognition function. ✎ It is recommended to use the remote control no further than 10 cm from your face.
Page 156 SMART ➾ Internet Types URL manually on TV or visits websites added to Favourite. Types in the web address. Add the current page to favorites. Chooses when you open several web browsers.
Page 157 ✎ Internet supports up to Flash 11 but does not support platform-dependent technology like ActiveX. ✎ Internet only works with a pre-installed plug-in. ✎ Internet may not play any media file format other than the following: JPEG / PNG / GIF ✎...
Page 158 Sign-up is required to use LG Smart World. Free apps are available immediately after signing up, but you should register your payment method in order to use paid apps. You can sign up and register payment methods on the TV or on our website (www.lgappstv.com).
Page 159 • If you sign up on your TV, no additional sign-up on the LG I have already signed website (www.lgappstv.com) is required. up on the TV. Do I need...
Page 160 Problem Solution • You can register and use more than one ID on one TV. • You can view the IDs registered on the TV in SMART Can each family member ➾ Sign in ➙ ID List. use a different ID on a • You can check the list of apps purchased by each ID.
Page 161 Problem Solution • If you want to check an app you purchased on the TV, sign I purchased an app in and view it on the Purchased Apps menu. from the website (www. lgappstv.com). How can I Select the ID at the top of Home and check the app in use it on the TV? Page ➙ Purchased Apps.
Page 162 • Check if the TV model supports LG Smart World. • Apps from LG Smart TV's LG Smart World can only be run Can I use apps from LG on LG Smart TV.
Page 163 Problem Solution How can I find out which • Select the ID at the top of Home and check the currently ID is currently signed in to signed-in ID in My Page ➙ My Information. the TV? I installed an app on my • Select SMART ➾ My...
Page 164 I forgot my TV password. • If you provide other information than the ID and password What should I do? when signing up on your TV or the LG website (www. lgappstv.com), you can recover your password on the website.
Page 165 Problem Solution • To purchase paid apps, you should have a credit card registered on TV or the website (www.lgappstv.com) or have credit. If you do not want your credit card details to Do I have to save the payment information to be saved, charge credit in advance.
Page 166 Problem Solution • To purchase paid apps, you need to have a credit card registered with the website (www.lgappstv.com). I signed up on my TV, but Also, you can have your credit ready by charging it on the I cannot purchase paid website to purchase them.
Page 167 • If you are already a member, you can still use your existing ID or change it to the email address. • The LG account allows you to sign into all of the LG Smart service with a single ID and password.
Page 168 SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Service❐Country❐Setting You can change the country setting of your Smart TV. The Premium service and LG Smart World that are available for the country you selected will be provided. Auto Setting A service country is automatically set for your Smart TV.
Page 169: To❐Use❐Screen❐Remote
To❐use❐Screen❐Remote ❐ ❐ Press❐the❐ ❐button❐on❐the❐Magic❐Remote❐Control. Select a button on the Screen Remote displayed on the screen using the Magic Remote Control.
Page 170 ❐ ❌ To❐use❐Screen❐Remote ✎ The type of buttons on the Screen Remote varies depending on the region or the type of a connected device. ✎ Image shown may differ from your TV. Change Device tab Exits the Screen Remote Moves the position of the Screen Remote to left or right TV operation buttons ✎...
Page 171 To❐control❐a❐device❐connected❐to❐the❐TV❐using❐the❐Screen❐ ❐ ❐ Remote You can control a device connected via SimpLink or MHL using the Screen Remote. 1 Check if the device is connected to the TV. 2 After pressing the button on the Magic Remote Control, select the device you want to control in the Change Device tab.
Page 172: To❐Use❐The❐Universal❐Control❐Function
To❐use❐the❐Universal❐Control❐function ❐ ❐ [For Magic Remote Control only] [This function may not be applied some countries.] With the Magic Remote Control, you can control a set-top box, Blu-ray player, home theatre system, etc. 1 Check if a device you want to set is connected to your TV. 2 After pressing the button on the Magic Remote Control, select the icon of a device you want in the Change Device tab.
Page 173 ❐ ❌ To❐change❐or❐clear❐the❐Universal❐Control❐settings 1 After pressing the button on the Magic Remote Control, select the (TV/input selection) button. 2 Select Change Setting Cancel Setting at the bottom of the device to be changed. ✎ When Change Setting, check if the power of the device to be changed is turned on.
Page 174 ✎ You can set one device per type. ✎ With the Screen Remote, you can only control the devices of a brand or manufacturer that you can select in the setup screen. ✎ If you connect to a network before setting the universal remote control, update for the latest manufacturer list is available.
Page 175: To❐View❐3D❐Images
To❐view❐3D❐images ❐ ❐ 3D imaging is a technology that utilizes the slight difference in the left and right eyes to make images on TV look just like real-life 3-dimensional space. 1 Play a 3D image title or turn to a 3D programme. 2 Put on 3D glasses.
Page 176 To❐adjust❐details❐of❐3D❐images ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐PICTURE❐➙❐3D❐Settings Adjusts various aspects of 3D imaging. Provides appropriate 3D depth. • 3D Depth : Adjust 3D depth between object and 3D Mode background. • 3D Viewpoint : Adjust 3D image closer/farther from user.
Page 177 3D Sound Zooming Provides the 3D-optimised sound. Converts to 3D screen automatically by analysing the 3D Pattern Recognition pattern of the original screen. Normal Image View The 3D effect is removed leaving a 2D image. Corrects the colour of 3D images. 3D Colour Correction ✎...
Page 178 Viewing❐3D❐images❐-❐warning ❐ ❐ ✎ When viewing 3D images, it is recommended that the viewer maintain a distance of at least twice the screen's diagonal length. ✎ 3D images may not be viewed correctly with shutter-type glasses that require recharging. ✎ If a future 3D broadcasting format that is not supported by this TV becomes the standard, you may require an additional device such as a set-top box.
Page 179 Using❐3D❐glasses❐-❐warning ❐ ❐ ✎ Do not use the 3D glasses as a replacement for your own corrective glasses, sunglasses, or protective goggles. Incorrect use of 3D glasses may cause eye injuries. ✎ Do not store 3D glasses in extreme conditions. Exposure to excessively high or low temperatures may deform the lenses.
Page 180 What❐is❐Time❐Machine❐Ⅱ? ❐ ❐ It is a function you can use to record a programme you are currently watching or want to watch and also rewind a programme you are watching in real time. Immediate Rec Immediately records a programme you are watching. Selects a programme you want or sets the time to Scheduled Rec record.
Page 181 ✎ [Depending on model] You can also record digital/analogue programmes transmitted over an RF cable and content played through the AV IN input. ✎ Recording copyrighted content, provided with a set-top box using an AV jack, is not supported. Recording genuine DVD/Blu-ray titles is also not supported.
Page 182 To❐use❐the❐immediate❐rec❐function ❐ ❐ ❐➾❐Rec. Time Machine II Display progress bar Rec. Record from the scene you are currently watching ✎ The picture may differ from the screen on the TV. ✎ The picture may differ from the screen on the TV. The Rec.
Page 183 ✎ You can also record immediately using the Rec. button in the Information display window. ✎ Up to 3 hour of instant recording is supported. To change the end time of the recording, press the Recording stop button and set the Recording end time modify option.
Page 184 ❐ ❌ To❐stop❐recording ❐❐➾ (Recording❐stop)❐➾❐Recording❐stop ❐ ❌ To❐modify❐the❐recording❐end❐time ❐❐➾❐ (Recording❐stop)❐➾❐Recording❐end❐time❐modify ✎ You can set up to 5 hours for Recording end time modify.
Page 185 To❐schedule❐recording ❐ ❐ ❐➾❐ ❐➙❐Schedule (Progress bar) This is a function that allows you to set the date and time to record a ❐ programme you want to watch. live Schedule Option Recorded TV Schedule List ✎ You can start Schedule from SMART...
Page 186 TV Guide Manual Timer You can select a programme you You can select a date, time and want to schedule for watching or channel to schedule the watching or recording. recording time. TV Guide Manual Timer Manual Timer Schedule List -24H +24H TV Guide...
Page 187 To❐check❐or❐modify❐the❐schedule❐list ❐ ❐ ❐➾❐ ❐➙❐Schedule❐List (Progress bar) This is a function you can use to check, modify or delete the watching and recording schedule you have set. ✎ Up to 30 programmes can be added to the Schedule List. ✎ You can start Schedule List from SMART...
Page 188 To❐watch❐recordings ❐ ❐ SMART❐ ❐➾❐SmartShare ❐➙❐Recorded❐TV You can view the recordings stored on a USB device. You can select a recording to play or delete. Play on previous Resumes play of a recording you have played back playtime. before. Play from the start. Plays back the selected recording from the beginning.
Page 189 To❐manage❐recordings ❐ ❐ SMART❐ ❐➾❐SmartShare ❐➙❐Recorded❐TV Prevents the selected recording from being automatically Protection deleted. Delete Deletes the selected recording.
Page 190 To❐control❐playback❐of❐recordings ❐ ❐ Press❐the❐Wheel❐(OK)❐button❐on❐the❐remote❐control❐while❐playing. Select a point from which to play Set recordings playback option Clip-Edit Repeat Option Adjust picture while Repeat/save clip View in 3D playing (Displayed only for models that support 3D) ✎ The picture may differ from the screen on the TV.
Page 191 To❐connect❐a❐USB❐device❐for❐Time❐Machine❐Ⅱ ❐ ❐ 1 Prepare a USB device to be used for Time Machine Ⅱ. 2 Connect a USB storage device to the port with the HDD IN label at the back or on the side of your TV. 3 To use a USB device only for the Time Machine Ⅱ function, you must initialise the device. Select SMART ➾ Time Machine Ⅱ ➙ Option ➙ USB device initialisation if you connect a device that has not been initialised. The USB device initialisation screen appears. To complete USB Device Initialisation and use TimeShift, set the TimeShift mode to ON.
Page 192 ✎ You can use a Hard Disk Drive (HDD) or Solid State Drive (SSD) as a USB device for Time Machine Ⅱ only. ✎ It is recommended that you use a USB device with a capacity between 40 GB and 2 TB. ✎ For an SSD, there is a limit to the amount of reading/writing that can be done. Therefore, it is recommended that you use a HDD. ✎ To remove a USB device, select Quick Menu ➙ USB Device. Make sure you receive the confirmation message that the USB device has been removed. ✎ If a USB device is faulty, the Time Machine Ⅱ function may not operate normally. ✎ If you use a USB extension cable, the USB device may not be recognized or may not work properly.
Page 193 What❐is❐TimeShift❐(real-time❐playback)? ❐ ❐ It is a function you can use to save the programme you are currently watching temporarily on a USB device so you can play back a scene you missed while watching TV. This function allows you to continue watching from where you were previously if you go out for a while.
Page 194 To❐use❐the❐TimeShift❐(real-time❐playback)❐function❐ ❐ ❐ Use the left or right navigation button on the Magic remote control to wind the picture you are watching back or forward by 10 seconds. Live Recorded TV Schedule List Schedule Option ✎ You can also operate TimeShift using the left or right navigation button on a standard remote control.
Page 195 To❐set❐the❐Time❐MachineⅡ❐functions ❐ ❐ SMART❐ ❐➾❐Time❐MachineⅡ❐➙❐Option You can change the settings for Time MachineⅡ while using the function. [Depending on model] Sets the picture quality of recordings. You can set it to Recording Quality High Quality Normal Quality. ✎ The recording time may vary depending on the recording quality.
Page 196 Automatically deletes old recordings when a USB device Auto deleting is full in order to secure space to save new recordings. ✎ Protected recordings are not deleted automatically. Sets a connected storage device to be used only for USB Device Time Machine.
Page 197 What❐is❐Motion❐Recognition? ❐ ❐ You can control the TV simply by gesturing for the camera. You can use the Motion Recognition function to turn the TV off, change the channel and control the volume. ✎ Motion Recognition is only a function for watching TV and it is not supported when using the smart menu, such as when connecting wireless devices, including TV apps or USB ports.
Page 198 ❐ ❐ 1 Prepare the Smart TV camera for use. If your Smart TV is not equipped with a camera, install an LG video call camera (Sold separately). (For more information, please refer to the installation manual or owner's manual of the camera.)
Page 199 5 Move your hand left or right to select a function. Bend and then straighten your index finger to start the function. 6 If you lower your hand out of the range of motion recognition, the controller disappears from the screen. ✎...
Page 200 ✎ The Motion Recognition may not be working properly if: • You are in either too bright or too dark place. (Optimal ambient brightness: 50 lux - 600 lux) • When your hand cannot be recognized because of an intense bright light behind you.
Page 201 ✎ A gesture may not be recognised in the following cases. • If Motion Recognition is set to SMART ➾ Settings ➙ OPTION, : Set it to On. • If any other menu than the motion recognition controller is displayed on the TV screen, : Make it disappear.
Page 202 ✎ If multiple people attempt to perform motion recognition at the same time, only the first gesture is recognized. To switch hands when operating the controller, lower your first hand down to clear the controller from the screen and then raise your second hand up for motion recognition. ✎...
Page 203 1 Prepare the Smart TV camera for use. If your Smart TV is not equipped with a camera, install an LG video call camera (AN-VC500, sold separately). (For more information, please refer to the installation manual or owner's manual of the camera.)
Page 204 ❐ ❌ To❐take❐a❐video SMART❐ ❐➾❐MY❐APPS❐➙❐Camera❐➙❐ (Video❐Mode)❐➙❐ ❐(Start) To❐stop❐taking❐a❐video,❐press❐ ❐(Stop)❐again. Zoom in/out Video mode Settings View the picture/video taken Take a picture Picture mode ✎ Image shown may differ from your TV.
Page 205 ❐ ❌ To❐set❐up❐the❐camera SMART❐ ❐➾❐MY❐APPS❐➙❐Camera❐➙❐ ❐(Settings) Properties You can set the properties of pictures/videos you will take. You can select a device where the pictures/videos taken will Storage device be saved.
Page 206 ✎ For a USB storage device, use only a USB hard disk that is formatted with an NTFS file system provided in Windows. If a storage device is formatted with a non-Windows Program, it may not be recognized. ✎ In case of watching the videos or seeing the pictures, you can only open one recent file.
Page 207 What is Dual Play mode? ❐ When playing a 1:1 battle game with a game console, such as Playstation, XBox and Wii, users used to play the game with the screen divided top and bottom or side by side. With Dual Play mode, each player can enjoy the game with a full screen. To play in Dual Play mode, the Dual Play glasses (type A and B) are required.
Page 208 Starting Dual Play ❐ 1 Connect your game console to your TV. 2 Select SMART ➾ More ➙ Dual Play. The Dual Play mode starts. 3 Put on the Dual Play glasses to enjoy game. 4 The Dual Play mode turns off when you select SMART ➾...
Page 209 ✎ The game should support the Screen split mode to be played in Dual Play mode. ✎ If the screen does not look clear enough with the Dual Play glasses on, players can change the glasses with each other. You should choose proper glasses according to the operation type of Dual Play.
Page 210 Cautions When Using Dual Play Glasses ❐ ✎ Please note that Dual Play glasses are different from regular 3D glasses. There is the mark "Dual Play" written on the Dual Play glasses. ✎ Do not use Dual Play glasses as ordinary glasses, sunglasses or protective goggles.
Page 211 ✎ Do not drop Dual Play glasses or allow them to come into contact with other objects. This can result in damage to the product. ✎ The lenses of Dual Play glasses (polarizing film) are easily scratched. Use a soft clean cloth when cleaning them. Foreign particles on the cloth may cause scratches.
Page 212 Dual Play Supporting Mode [FHD] ❐ Horizontal Frequency Vertical Frequency Input Signal Resolution (KHz) (Hz) 480i 720x480 15.73 Composite 576i 720x576 15.625 480i 720x480 15.73 Component 480p 720x480 31.50 576i 720x576 15.625 720p 1280x720 37.5 33.75 1080i 1920X1080 HDMI/ 28.125 67.50 Component 56.250...
Page 213 Dual Play Supporting Mode [ULTRA HD] : HDCP1.4 ❐ Horizontal Frequency Vertical Frequency Input Signal Resolution (KHz) (Hz) 480i 720x480 15.73 Composite 576i 720x576 15.625 480i 720x480 15.73 Component 480p 720x480 31.50 576i 720x576 15.625 720p 1280x720 37.5 33.75 1080i 1920X1080 HDMI/ 28.125...
Page 214 Horizontal Frequency Vertical Frequency Input Signal Resolution (KHz) (Hz) 53.95 23.976 HDMI 2160p 3840x2160 56.25 61.43 29.97 67.5 ✎ Some models may not support Composite/Component input. ✎ Supported Dual Play Formats: Side by Side / Top & Bottom...
Page 215 You can download the LG TV Remote app from Google Play Store or Apple App Store and use it on any TV connected with your smartphone. • Now you can enjoy your favorite TV shows on your smartphone. (Some models only) • You can easily enter your account information to log in.
Page 216 • You can capture the screen you are watching and share it through social network services such as Twitter and Facebook. ✎ The supported functions may vary depending on the TV or the version of the LG TV Remote app.
Page 217 To❐use❐a❐USB❐wired/wireless❐mouse ❐ ❐ Connect your mouse to the USB port. Use the mouse to move the pointer on the TV screen and select the menu you want. Mouse Magic Remote Control Left Button OK Button on Magic Remote Control Wheel Button Wheel Button on Magic Remote Control ✎...
Page 218 ✎ It is recommended to use the product which is tested for compatibility with LG TV. LOGITECH K200, LOGITECH K400, MICROSOFT Comfort Curve 2000, MICROSOFT MS800, and LG Electronics ST-800 ✎ You can change the input language by pressing the language switch key (or the right Alt key) on your keyboard.
Page 219 Connect your gamepad to the USB port on the TV if the game requires a gamepad. ✎ It is recommended to use an authorized gamepad which is tested for compatibility with LG TV. Logitech F310, Logitech F510, Logitech F710, Logitech Rumblepad 2 Logitech Cordless Rumblepad 2, Logitech Dual Action Gamepad,...
Page 220 SMART ➾ Settings ➙ SUPPORT ➙ Software Update Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Set it to On. Software Update If an update is available, a prompt will appear to perform the update.
Page 221 ✎ When the update starts, the update progress window appears for a short time and disappears. ✎ The latest version can be obtained via the digital broadcast signal or an internet connection. ✎ Changing the programme while downloading the software via a digital broadcast signal interrupts the download process.
Page 222 If the following symptoms occur, please carry out the checks and adjustments described below. There may be no malfunction. SMART ➾ Settings ➙ SUPPORT ➙ Signal Test Shows the MUX and Service information etc. If you select Antenna & Satellite or Cable &...
Page 223 Pictures ❐ SMART ➾ Settings ➙ SUPPORT ➙ Picture Test First run a Picture Test to verify that the image signal output is normal. If there is no problem with the test image, check external device connections and broadcast signals. Problem Solution Images from previous...
Page 224 Problem Solution • Such a problem may happen when there is strong Vibrating horizontal/vertical electronic interference. Turn off other electronic devices lines and fishnet patterns such as mobile phones, power tools and other small appear momentarily. electrical appliances. • This may occur in case of a weak signal or unstable The screen display freezes reception.
Page 225 Problem Solution • Check the HDMI Ⓡ cable specifications. If your HDMI Ⓡ cable is not genuine, images may fade in and out or not The display is inactive or be displayed properly. unclear when connected to • Ensure that all cables are securely connected. When an HDMI Ⓡ...
Page 226 Sound ❐ SMART ➾ Settings ➙ SUPPORT ➙ Sound Test First run a Sound Test to verify that the sound signal output is normal. If there is no problem with the test sound, check connected external devices and the broadcast signal. Problem Solution Screen display is on but there...
Page 227 Problem Solution • If the issue affects a specific TV programme only, it TV sound is not in sync may be caused by problems with the broadcast signal with the image or the sound for the individual station. Check with the TV station or breaks up occasionally.
Page 228 Problem Solution On certain programmes, there • In Language, set Language ➙ Audio Language is no sound at all, or only the the language of your choice. Even if you change the background music can be language on Multi Audio, you can go back to the heard default setup once you turn off the power or change (in case of a programme...
Page 229: Pc Connection Problem
PC connection problem ❐ Problem Solution • Verify that the computer and the TV are securely connected. The screen display • Turn the TV off and back on using the remote control. does not come on • Restart the PC with the TV on. after connecting to the •...
Page 230 Problem Solution When connected to the computer, the display is • Set the resolution to support PC input. (If this does not partially cut off or shifts work, reboot the computer.) to one side.
Page 231: Problems Replaying Movies In My Media
Problems replaying movies in My Media ❐ Problem Solution • Check whether the file on the USB storage device can be I cannot view the files on read on a computer. the Movie List. • Check whether the file extension is supported. •...
Page 232 Problem Solution "Audio not supported." • Make sure that the file replays normally on the message appears or the computer's video player. (Check for damaged files.) sound is not normal even • Check if the audio codec is supported by the computer. though the image display is •...
Page 233 Problem Solution • Make sure that the file replays normally on the computer's video player. (Check for damaged files.) • Check if the video file has the same name as the subtitle file. Subtitles are not displayed. • Make sure that the video and subtitle files are in the same folder.
Page 234 Product certified before February 15, 2013 Product certified after February 15, 2013 Продукт, сертифицированный до 15 Продукт, сертифицированный после 15 февраля 2013 г. февраля 2013 г.
Page 235 ПІІ ‘ЛГ Електронікс Україна’, Україна, 01004, м. Київ, вул. Басейна, 4 (літера А), тел.: +38 (044) 201-43-50, факс: +38 (044) 201-43-73 Обмеження України на наявність небезпечних речовин Устаткування відповідає вимогам технічного регламенту щодо обмеженного використання небезпечних речовин в електричному і електронному обладнанні. Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, in terms of restrictions for the use of certain dangerous substances in electrical and electronic...
Page 236 ❐ EU Conformity Notice LG Electronics hereby declares that this product is in compliance with the following Directives. R&TTE Directive 1999/5/EC EMC Directive 2004/108/EC LOW VOLTAGE Directive 2006/95/EC The products described above comply with the essential requirements of the directives specified.
Page 237 RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end user should contact the national spectrum authority in France. European representative: LG Electronics Inc. Krijgsman 1, 1186 DM Amstelveen, The Netherlands The product is designed for indoor use only.
Page 238 CE Notified Body statement: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Page 239 Deklarata e Konformitetit për BE-në Napomena o usklađenosti sa propisima LG Electronics nëpërmjet kësaj deklaron se ky produkt është në përputhje me Direktivat e LG Electronics ovim putem izjavljuje da je ovaj mëposhtme. proizvod usklađen sa sljedećim direktivama: Direktivën R&TTE 1999/5/KE Direktiva o radijskoj opremi i Direktivën EMC 2004/108/KE...
Page 240 на основните изисквания на посочените základními požadavky uvedených směrnic. директиви. Zastoupení v Evropě: Европейски представител: LG Electronics Krijgsman 1, 1186 DM LG Electronics Krijgsman 1, 1186 DM Amstelveen, Nizozemsko Amstelveen, Нидерландия Pouze pro vnitřní použití. За употреба само в закрити помещения.
Page 241 ❌ [Dansk] ❌ [Nederlands] EU-overensstemmelseserklæring Conformiteitsverklaring (EU) LG Electronics erklærer hermed, at dette LG verklaart hierbij dat dit product voldoet produkt overholder følgende direktiver. aan de volgende richtlijnen. R&TTE-direktiv 1999/5/EC R&TTE-richtlijn 1999/5/EC EMC-direktiv 2004/108/EC EMC-richtlijn 2004/108/EC LOW VOLTAGE-direktiv 2006/95/EC Laagspanningsrichtlijn 2006/95/EC...
Page 242 ❌ [Eesti] ❌ [Suomi] EÜ vastavuskinnitus EU-vaatimustenmukaisuusilmoitus Käesolevaga kinnitab LG Electronics, et see LG Electronics vakuuttaa täten, että tämä toode ühildub järg¬miste direktiividega. tuote on seuraavien direktiivien mukainen. Raadioseadmete ja R&TTE-direktiivi 1999/5/EC telekommunikatsioonivõrgu lõppseadmete EMC-direktiivi 2004/108/EC direktiiv 1999/5/EÜ LOW VOLTAGE -direktiivi 2006/95/EC Elektromagnetilise ühilduvuse direktiiv...
Page 243 ❌ [Français] ❌ [Deutsch] Notice de conformité UE EU-Konformitätserklärung LG Electronics atteste que ces produits est en LG Electronics erklärt hiermit, dass dieses conformité avec les Directives suivantes. Produkt den folgenden Richtlinien entspricht: Directive 1999/5/CE des R&TTE R&TTE-Richtlinie 1999/5/EC Directive 2004/108/CE EMC...
Page 244 ❌ [ΕΛΛΗΝΙΚΑ] ❌ [Magyar] Δήλωση συμμόρφωσης Ε.Ε. EU megfelelőségi nyilatkozat Η LG Electronics δηλώνει ότι το παρόν Az LG Electronics ezúton kijelenti, hogy a προϊόν συμμορφώνεται με τις εξής Οδηγίες: termék megfelel a következő irányelvek előírásainak: Οδηγία 1999/5/ΕΚ περί Ραδιοεξοπλισμού και...
Page 245 ❌ [Italiano] ❌ [Қазақша] Avviso di conformità EU ЕО сәйкестік туралы ескертуі LG dichiara che questo prodotto è conforme LG Electronics осы құжат арқылы бұл alle seguenti direttive. құрылғының мына директиваларға сай екенін мәлімдейді. Direttiva R&TTE 1999/5/CE Direttiva EMC 2004/108/CE Радио...
Page 246 ❌ [Latviešu] ❌ [Lietuvių k.] Paziņojums par atbilstību ES direktīvām EB atitikties deklaracija LG Electronics ar šo paziņo, ka šis „LG Electronics“ pareiškia, kad šis produktas izstrādājums atbilst turpmāk minētajām atitinka tokias direktyvas. direktīvām. R&TTE direktyvą 1999/5/EB R&TTE direktīva 1999/5/EK EMS direktyvą...
Page 247 ❌ [Македонски] ❌ [Norsk] Известување за усогласеност со ЕУ Samsvarsmerknad for EU LG Electronics јавно изјавува дека овој LG Electronics erklærer herved at dette производ е во согласност со следните produktet er i henhold til de følgende директиви. direktivene. R&TTE директива 1999/5/EC R&TTE-direktiv 1999/5/EC...
Page 248 ❌ [Português] Deklaracja zgodności z normami UE Aviso de conformidade da UE Firma LG Electronics niniejszym zaświadcza, A LG Electronics declara por este meio que że ten produkt spełnia wymagania este produto está em conformidade com as poniższych dyrektyw. seguintes Directivas.
Page 249 ❌ [Română] ❌ [Русский] Declaraţie de conformitate UE Уведомление о соответствии нормам ЕС Prin prezenta, LG Electronics declară că acest produs este conform cu următoarele Компания LG Electronics настоящим Directive. заявляет о том, что данное изделие соответствует следующим директивам. Directiva R&TTE 1999/5/CE Directiva EMC 2004/108/CE Директива...
Page 250 Napomena o usklađenosti sa Napomena o sukladnosti s EU standardima standardima LG Electronics ovim izjavljuje da je ovaj LG Electronics ovim putem izjavljuje da je ovaj proizvod usklađen sa sledećim direktivama:. proizvod sukladan sljedećim Direktivama. R&TTE direktiva 1999/5/EC R&TTE direktiva 1999/5/EC EMC direktiva 2004/108/EC R&EMC direktiva 2004/108/EC...
Page 251 ❌ [Slovenščina] Vyhlásenie o zhode pre oblasť EÚ Izjava o skladnosti EU Spoločnosť LG Electronics týmto vyhlasuje, LG Electronics izjavlja, da je ta izdelek v že tento výrobok dosahuje súlad s skladu z naslednjimi direktivami. nasledujúcimi smernicami. Direktiva 1999/5/ES o radijski opremi in Smernica R&TTE 1999/5/ES...
Page 252 ❌ [Español] ❌ [Svenska] Aviso de conformidad con la UE Meddelande om EU-regelefterlevnad Por la presente, LG Electronics declara que LG Electronics intygar härmed att den här este producto cumple con las siguientes produkten uppfyller följande gällande direktiv: directivas. R&TTE-direktivet 1999/5/EG Directiva sobre equipos radioeléctricos y...
Page 253 ❌ [Türkçe] ❌ [Укрaїнcькa] AB Uygunluk Bildirimi Підтвердження відповідності стандартам ЄС LG Electronics, burada bu ürünün aşağıdaki Direktifler ile uyumlu olduğunu beyan eder. Цим компанія LG Electronics підтверджує відповідність цього продукту вимогам R&TTE Direktifi 1999/5/EC директив, що перелічені нижче. EMC Direktifi 2004/108/EC DÜŞÜK VOLTAJ Direktifi 2006/95/EC...
Page 254 If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. and Information of Regional Take back Schemes can be found at : http://www.lg.com/global/sustainability/environment/take-back-recycling.jsp...
Page 255 ❐ Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.
Page 256 waste batteries. For more detailed information about recycling of this product or battery, please contact your local authority, your household waste disposal service or the shop where you purchased the product.
Page 257: Energy Saving
❐ Energy Saving Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills. The following indications allow to reduce power consumption when the television is not being watched: • turning the television off at its mains supply, or un-plugging it, will cut energy use to zero for all televisions, and is recommended when the television is not being used for a long time, e.g.

This manual is also suitable for:

55la8609.aeu 47la8609.aeu 42la8609.aeu 65la9709.aeu 60la8609.aeu 55la9709.aeu

LG 55LA860V.AEE User Manual

Quick Links

Related Manuals for LG 55LA860V.AEE

Summary of Contents for LG 55LA860V.AEE

This manual is also suitable for:

Table of Contents