Advertisement
Using your machine
Charging your 2-in-1 vacuum cleaner
NOTE: Initial charge is 5 hours, charging will be required before first use. Failure to fully charge the battery before
first use may result in poor battery performance. Charge time is 5 hours thereafter.
The vacuum can be charged with the handheld either attached to or detached from the main body.
Plug the charger into the charging port, located on
the top of the handle of the handheld and plug
into the mains.
As an upright vacuum cleaner
CAUTION: Never leave the vacuum cleaner in one spot for an extended period of time when in use as this may
damage the floor surface. Vax cannot be held responsible for damage to the floor surface if this recommendation
is not followed.
Unplug the charger
from the mains and
from the handheld.
Place foot on the
floorhead and pull the
handle backwards to
recline the machine.
Once fully charged (5
hours) the LED indicator
on the handheld will
illuminate green.
Press the On/Off button
on the handle to switch
the machine on.
When the vacuum needs
recharging the LED light
on the handheld will flash
red and the machine will
cut out.
To select between high
and low suction press the
extended runtime button.
Advertisement
