Replacing The Pure N Fresh Filter - LG GR-5D725SL Owner's Manual

Inside Walls (allow freezer to warm Inside Walls (allow freezer to warm
up so the cloth will not stick) up so the cloth will not stick)
To help remove odors, you can wash the inside
of the refrigerator with a mixture of baking
soda and warm water. Mix 2 tablespoons
of baking soda to 1 litre of warm water. Be
sure the baking soda is completely dissolved
so it does not scratch the surfaces of the
refrigerator.
Door Liners and Gaskets Door Liners and Gaskets
Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use cleaning
waxes, concentrated detergents, bleaches,
or cleaners containing petroleum on plastic
refrigerator parts.
Plastic Parts (covers and panels) Plastic Parts (covers and panels)
Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use window
sprays, abrasive cleansers, or flammable fluids.
These can scratch or damage the material.
Condenser Coil Cover Condenser Coil Cover
Use a vacuum cleaner with an attachment to
clean the condenser cover and vents located
at the rear of the appliance. Do not remove the
panel covering the condenser coil area. Always
disconnect the main power before cleaning.
Replacing the Pure N Fresh
filter
It is recommended that you replace the Pure N
Fresh filter:
Approximately every 1~2 years.
When the Replace light turns on.
1 Remove the Old Filter
Turn the filter cover to the left to detach
from the refrigerator wall. The filter is
located on the inside of the filter cover.
Remove the filter from the cover and
replace it with a new filter.
2
Installing a New Pure N Fresh filter.
Place the new filter inside of the cover
with the side that says "Front" facing
outward. Turn the filter cover to the right
to reattach it to the refrigerator wall.
After changing the filter, touch and hold
the Pure N Fresh filter button on the
front display for three seconds to reset
the filter sensor.
MAINTENANCE 29