Table of Contents
Advertisement
TROUBLESHOOTING
No image is displayed
Problem
Is the product power cord
connected?
Does the 'Out of range'
message appear?
Does the 'Check signal cable'
message appear?
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
y See if the power cord is properly connected to the outlet.
y The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB, HDMI, DVI-D, Display Port : 1920 x 1080 @ 60 Hz
y The signal cable between PC and product is not connected. Check
the signal cable.
y Press the 'INPUT' menu in the remote Control to check the input
signal.
y See if the plug&play function is supported by referring to the video
card user manual.
TROUBLESHOOTING
Resolution
Resolution
59
Advertisement
Table of Contents
