Option Settings - LG 55WS50MW Owner's Manual

OPTION settings

1
Press MENU to access the main menus.
2
Press the Navigation buttons to scroll to
OK.
3
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
- To return to the previous level, press BACK.
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language To choose the language in which the control names are displayed.
ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could
result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to
remain on the screen for a long period of time.
Setting
Normal
Orbiter
Inversion
White Wash
DPM Select A user can choose to turn the power saving mode on / off.
y y
y y
y y
Fail Over If there is no input signal, it automatically switches to another input with signal.
mode
Off
Auto
Current
Input Source
RGB
DVI
HDMI
DP
Manual
OPTION
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed image to
remain on the screen. To avoid a permanent image on the screen, the screen will
move every 2 minutes.
This function inverts the panel color of the screen. The panel color is automatically
inverted every 30 minutes.
White wash fills the screen with solid white. This helps removes permanent images
burned into the screen. A permanent image may be impossible to clear entirely with
white wash.
NOTE
You can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
It makes a little difference according to your environment.
It may not be supported depending on the model.
Stops auto switch of the input source.
Attempts to find another input source having video signal according to the defined
input order if no video signal comes from the current input source.
(Refer to the sequence of the table below.)
Attempt 1 Attempt 2
HDMI
HDMI
DVI
HDMI
The input source changes according to the specified order. If there is no video signal
from the specified input source, then the current input source remains.
OPTION
Language
ISM Method
and press
DPM Select
Fail Over
Factory Reset
Set ID
Tile Mode
PIP/PBP
Key Lock
Interface Select
PC Power Control
USB Content Recovery
Product/Service Info.
Description
Attempt 3
DVI DP
DP RGB
DP RGB
DVI RGB
CUSTOMIZING SETTINGS
Move
: Normal
: On
: Off
: 1
: Off
: RS232C
: Not connected
: Off
Attempt 4
If there is no available video
signal to switch to, then the
current input source remains.
47
OK