Kenwood M-505USB-S Instruction Manual page 9

Buttons both on the remote control unit and
the unit
1 ( ) button
To switch the system on or to standby mode.
standby indicator (on the main unit only)
7 EQ (EQ) button
To select the desired sound eff ect : POP, CLASSIC, ROCK,
JAZZ, or FLAT (off ).
P.CALL/ALBUM 5/∞ (p.call/album up/down)
8
buttons
To select a preset radio station for TUNER.
To select an album (folder) of audio fi les.
SEARCH/TUNING 4 /¢ (4 /¢ search
9
+/–) buttons
To search forward/backward to next/previous track for CD.
To skip tracks for CD.
To search forward/backward or to skip to the next/
previous fi les for audio fi les.
To fast forward or rewind a tape.
To tune to higher/lower radio frequency or search radio
stations for TUNER.
10 USB O.T.E (USB O.T.E) button
To record from CD to a USB device.
11 Source buttons
To select the source you want, or to turn the system on to
the selected source.
RVS PLAY (
12
To start or interrupt playback for TAPE.
To start recording for TAPE.
VOLUME UP/DOWN (volume knob) buttons
14
To increase or decrease the volume.
FWD PLAY 6 (6) button
17
To start or interrupt playback for CD, USB and TAPE.
To start recording for TAPE.
To start and interrupt recording for USB.
STOP 7 (7 stop) button
19
To stop playback for CD, USB and TAPE.
To stop program playback and recording for CD and USB.
To stop recording for USB and TAPE.
20 TAPE REC (TAPE rec) button
To start or interrupt recording from TUNER, CD, USB, or
AUX to a cassette tape.
X.BASS (X-bass) button
22
To switch on/off bass enhancement.
Buttons only on the remote control unit
SLEEP button
2
To select the delay time until switching to the standby
mode.
STEREO/MONO button
3
To switch between stereo mode and mono mode (on FM
band only) for TUNER.
RDS DISPLAY button
4
To change the display for RDS.
) button
5 P.MODE button
To program tracks/fi les for CD/USB.
To program preset radio stations for TUNER.
6 RANDOM button
To playback in random order for CD and USB.
13 digit 0 – 9/A – Z buttons
To select a track/fi le number for CD/USB.
To select a preset radio station for TUNER.
To enter fi le names in fi le search mode for audio fi les.
CLEAR button
15
To delete the fi le name entered during fi le search.
MUTE button
16
To interrupt and resume sound reproduction.
FILE SEARCH button
18
To select a desired fi le in audio fi les.
ENTER button
21
To confi rm the selection in fi le search mode for audio fi les.
23 REPEAT button
To repeat one track/fi le or all tracks/fi les for CD and USB.
24 PTY button
To carry out PTY search.
25 INTRO button
To play fi rst several seconds for each track of CD.
26 TIME DISPLAY button
To view the current status of the system.
To change the time display for CD.
To change the information display for audio fi les.
TIMER ON/OFF button
27
To turn the sleep timer on. The delay time is same as the
previous setting.
To cancel the sleep timer if working.
TIMER SET button
28
To set the delay time and turn the sleep timer on.
Buttons only on the main unit
(demo) button
29
To activate/deactivate the demonstration in power on
mode.
30 (0) button
To open or close the CD tray.
Standby mode
While the standby indicator is lit, a small amount of power is
supplied to the system to back up the memory. This is called
standby mode. Under the condition, the system can be turned
ON by the remote control unit.
9
EN