Video/Component Video Hookup - Sony SLV-D550P Operating Instructions Manual

filename[C:\3091712111SLVD550PUS\GB07ADV-US.fm]
GB03COV-US.book Page 64 Wednesday, January 14, 2004 10:27 AM
B Use this hookup if your TV has component video input jacks
Connect your TV via the COMPONENT VIDEO OUT jacks using a component
video cord (not supplied) or three video cords (not supplied) of the same kind and
length. You will enjoy accurate color reproduction and high quality images.
See page 61 for audio connections.
l : Signal flow
If your TV accepts progressive (525p) format signals, you must use this connection
and then set "Progressive" to "On" in the "SCREEN SETUP" menu (page 67). The
PROGRESSIVE indicator lights up in orange when the DVD player outputs
progressive signals.
Notes
• The connection using COMPONENT VIDEO OUT jack is only for the DVD player.
• Consumers should note that not all high definition television sets are fully compatible with
this product and may cause artifacts to be desplayed in the picture. In case of 525 progressive
scan picture problems, it is recommended that the user switch the connection to the
"
standard definition
this model 525p DVD player, please contact our customer service center.
64
S-Video/Component Video hookup
DVD-VCR
(blue)
Component video cord
(not supplied)
(DVD only)
PROGRESSIVE indicator
"
output. If there are questions regarding our TV set compatibility with
(red) (green)
TV
(green)
(blue)
(red)
filename[GB07ADV-US.fm] model name1[SLV-D550P]
model name2 [SLV-D350P] [3-091-712-11 (1) US]