Table of Contents
Advertisement
Appendix
Expand your telephone system
The handsets provided with your telephone system are pre-registered. Each
handset is assigned a number that shows on the handset display. Additional
handsets registered to the telephone system are assigned in sequential
order. For instance, if the telephone system already has HANDSET 1 and
HANDSET 2, the new registered handset is assigned HANDSET 3. This
Add and register a handset (optional)
You can add new handsets (LS6305, purchased separately) to your
telephone system, but each handset must be registered with the
handset shows 1.Press FIND HS on base 4sec and 2.Then press # on
handset alternately. You may need to charge the handset before registering
to the telephone base. For more details on battery charging, see the table
on page 4.
To register a handset:
1.
Place the unregistered handset in the telephone base or charger. If
1.Press FIND HS on base 4sec and 2.Then press # on handset do not
appear alternately on the handset screen after a few seconds, remove the
handset and place it in the telephone base or charger again.
2.
On the telephone base, press and hold /FIND HANDSET for about four
seconds (until the red IN USE light on the telephone base turns on) and
then release the button.
3.
On the handset, press # and the handset shows Registering...Please
wait. It takes about 10 seconds to complete the registration. The
handset shows HANDSET X Registered and you hear a beep when the
registration completes.
•
If the registration fails, the handset shows 1.Press FIND HS on base 4 sec
and 2.Then press # on handset alternately. To reset the handset, remove
the handset from the telephone base and place it back in. Try the registration
process again.
•
You cannot register a handset if any other system handset is in use.
43
Advertisement
Table of Contents
