Page 3
INDEX Diagram Features of the appliances Technical data 4 Installation instructions 4.1 Safety rules 4.2 Structure, framework and safety devices of the appliances 4.3 Assembly 4.3.1 Installation premises 4.3.2 Statutory regulations and technical requirements 4.3.3 Installation 4.3.4 Wiring 4.3.5 Equipotential 4.4 Preparing for installation Operation preparation 5.1 Preparation and Start-up...
Model Dim.: LxWxH (total h) Voltage rating Power Lead wire / Section of work surface IFTE1/E1C/E1R 400 x 610 x 220 (300) 400 V 3N or 230 V 3 5.0 kW 5 x 1.5 mm or 4 x 1.5 mm...
Page 6
4 - INSTALLATION INSTRUCTIONS 4.1 Safety rules 4.3.2 Statutory regulations and technical requirements During installation of the appliance, the following regulations must • Installation, modifications and maintenance of the appliance be adhered to: must be carried out by authorised personnel in compliance with •...
4 - INSTALLATION INSTRUCTIONS The worktable and appliance are clamped with six M5 screws; first cooling down the components. In order to collect the oil, place a drill the relevant holes in the worktable as described in fig. 2. In bowl under the drainpipe.
5 - SET-UP FOR OPERATION 5.3 Ignition 5.4 Cleaning and taking care of the machine The user must prepare a container to be placed under the drainpipe Never clean the appliance with jets of water, whether direct F (fig. 1) to collect oil and cooking remains. or pressurised! The bowl should be heat-resistant and designed not to allow the oil Remove, empty and wash the fat tray.
6 - INSTRUCTIONS FOR USE 6.1 Safety, cleaning and repair rules 6.3 Appliance care and frequency of maintenance • This appliance is used for the preparation of meals at industri- Attention! When cleaning, carefully avoid washing the al level. Usage and cleaning can be carried only by expert per- appliance with direct water jets or high-pressure sonnel.
Page 13
6 - INSTRUCTIONS FOR USE • contact with non-ferrous metals (element build up) 6.4.3 The 2002/96/EC (WEEE) Directive: • lack of oxygen (i.e. no air inlet, water lacking oxygen). information to users This informational note is meant only for Fig. A owners of equipment marked with the 6.4.2 Warnings and advice for maintenance of stainless symbol shown in fig.
Need help?
Do you have a question about the IFTE1 and is the answer not in the manual?
Questions and answers