Location Of Controls - Jensen JTA-325BTW User Manual

3-speed stereo turntable with stereo speakers, speed adjustment and bluetooth receiver

Hide thumbs

Table Of Contents

Table of Contents

1. 3.5mm AUX-IN Jack

2. 3.5mm Headphone jack

3. Bluetooth

/ Aux/Phono Press Button

4. Bluetooth LED Indicator

5. Power LED Indicator

6. Power On/Off / Volume Control Knob

7. Anti Shock Lock Down Screw

8. 45 RPM Record Adaptor

9. 33/45/78RPM Speed Selector

10. Auto Stop Switch

11. Tone Arm Rest/Holder

12. Pitch Adjust

13. USB Port For Computer Connection

14. Speaker Out RCA Jacks (L/R)

15. AC Power Cord

CAUTION

This unit should not be adjusted or repaired by anyone except qualified service personnel.

IMPORTANT: This turntable features a built in Anti-Shock system, and the turntable is

locked down when shipped from the factory. Rotate the ANTI-SHOCK LOCK DOWN

SCREW, in a clockwise direction to release the turntable and activate the anti-shock

feature before using the turntable.

Please Note - Before Use

Remove the stylus protector.

Make sure that the tone arm is unlocked and free

to move from the tone arm rest prior to operating.

Lock the tone arm in place again when not in use.

1. Switch the system on by turning the POWER

On/Off / VOLUME Control Knob in a clockwise direction. A "Click" sound will be

heard and the red Power LED Indicator lights up.

2. Press the Bluetooth

position (up -

3. Raise the turntable dust cover.

4. Place a record on the turntable platter (use the 45 RPM record adaptor if you are