Related Manuals for Philips 246B1
Summary of Contents for Philips 246B1
- Page 1 B Line 246B1 241B8 www.philips.com/welcome EN User manual Customer care and warranty 22 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
7.1 Resolution & Preset Modes ...20 8. Power Management ....21 9. Customer care and warranty . 22 9.1 Philips’ Flat Panel Monitors Pixel Defect Policy ....22 9.2 Customer Care & Warranty ..25 10. Troubleshooting & FAQs ..26 10.1 Troubleshooting ......26... -
Page 3: Important
• Please use approved power cord provided by Philips all the time. If your power cord is missing, please 1.1 Safety precautions and contact with your local service maintenance center. - Page 4 1. Important take shorter breaks more often at such as, alcohol, or ammonia-based your workstation than longer breaks liquids to clean your monitor. and less often; for example a 5-10 • To avoid the risk of shock or minute break after 50-60-minute permanent damage to the set, do continuous screen use is likely to not expose the monitor to dust,...
-
Page 5: Notational Descriptions
1. Important gradually over a period of time after 1.2 Notational Descriptions the power has been switched off. The following subsections describe Warning notational conventions used in this Failure to activate a screen saver, or document. a periodic screen refresh application may result in severe “burn-in”... -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. - Page 8 The display must be powered ON at all USB C times to be able to use this function. Audio out Some select Philips displays may not Power or Charge your device when it USB downstream enters to “Sleep” mode (White power LED USB downstream/USB fast charger blinking).
-
Page 9: Operating The Monitor
2. Setting up the monitor Menu and select “USB Standby Mode”, 2.2 Operating the monitor then, turn the function to “ON” mode (default=OFF). This will then keep the Description of the control buttons USB power and charging functions active even when the monitor is in sleep mode. - Page 10 On-Screen Display. You can use On-Screen Display (OSD) is a feature this as a reference when you want to in all Philips LCD monitors. It allows an work your way around the different end user to adjust screen performance adjustments later on.
- Page 11 2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 2560 x 1440. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 2560 x 1440 for best results.
-
Page 12: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation. -
Page 13: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • EasyRead: Helps improve reading Based on a scenario you select, of text based application like PDF SmartImage dynamically enhances the ebooks. -
Page 14: Smartcontrast
Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage. -
Page 15: Adaptive Sync
4.Adaptive Sync • AMD Radeon R9 290 4. Adaptive Sync • AMD Radeon R9 285 • AMD Radeon R7 260X • AMD Radeon R7 260 Adaptive Sync ■ Processor A-Series Desktop and Mobility APUs • PC gaming has long been an imperfect AMD A10-7890K experience because GPUs and monitors •... -
Page 16: Powersensor
5. PowerSensor™ detection signal for distances up to 5. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the display, step up of transmission and reception of... - Page 17 5. PowerSensor™ Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
-
Page 18: Designs To Prevent Computer Vision Syndrome (Cvs)
• Reposition your screen to appropriate height and angle syndrome (CVS) according to your height. 4. Choose Philips monitor for easy-on- Philips monitor is designed to prevent eyes. eye strain caused by prolonged computer use. • Anti-glare screen: Anti-glare... -
Page 19: Technical Specifications
7.Technical Specifications 7. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.2058 (H) mm x 0.2058 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 2560 x 1440 @ 60 Hz Viewing Angle 178°... - Page 20 7.Technical Specifications Stand Tilt -5 / +35 degree Swivel -180 / +180 degree Height adjustment 150 mm Pivot -90 / +90 degree Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 50Hz 230VAC, 50Hz Normal Operation 20.7 W (typ.)
- Page 21 (Non-operation) Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 22: Resolution & Preset Modes
7.Technical Specifications 7.1 Resolution & Preset Modes Maximum Resolution 2560 x 1440 @ 75 Hz Recommended Resolution 2560 x 1440 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67... -
Page 23: Power Management
8.Power Management 8. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 24: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 25 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 26 9.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 27: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 28: Troubleshooting & Faqs
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the... -
Page 29: General Faqs
For further assistance, refer to the Service period may cause "burn-in", also contact information listed in Important known as "after-imaging" or "ghost information manual and contact Philips imaging", on your screen. "Burn-in", customer service representative. "after-imaging", or "ghost imaging" * Functionality different according to is a well-known phenomenon in display. - Page 30 • Shut down your computer, Is the LCD screen resistant to disconnect your old monitor and scratches? reconnect your Philips LCD monitor. Ans.: In general it is recommended • Turn on your monitor and then turn that the panel surface is not on your PC.
- Page 31 PC, workstation or Mac? a periodic screen refresh application may result in severe “burn-in” or “after- Ans.: Yes. All Philips LCD monitors are image” or “ghost image” symptoms fully compatible with standard that will not disappear and cannot be PCs, Macs and workstations.
- Page 32 10.Troubleshooting & FAQs Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
- Page 33 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 246B1 and is the answer not in the manual?
Questions and answers