Delay Wash; Steam; Cold Wash; Turbo Wash - LG WM8100H A Series Owner's Manual

Delay Wash

You can set the desired start time.
B
A
1
Press and turn
2
Press the desired option to use the other options.
3
Press repeatedly to select the desired start
time.
- light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time
by one hour, up to 19 hours.
C
4
Press .

Steam

Adding the Steam option to these cycles help to
enhance washing performance.
By using a hot steam fabrics get the cleaning benefits
of a super hot wash.
B
A
1
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
C
4
Press .
WARNING
y Do not touch the door during steam cycles. The
door surface can become very hot. Allow the
door lock to release before opening the door.
y Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
NOTE
The steam option cannot be used with all cycles.
y
y Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
y Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
to the desired cycle.
to the desired cycle.

Cold Wash™

Adding the Cold Wash™ option reduces energy
usage and provides the same washing performance
as a warm water wash.
By using 6 different washing motion (Tumbling,
Rolling, Stepping, Scrubbing, Swing, Filtration),
fabrics get the cleaning benefits, without the energy
usage.
B
A
1
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
C
4
Press .
NOTE
When you select the Cold Wash™ option, wash
y
time will be increased up to 10 minutes.
y For high wash efficiency, it is recommended to
use less than 8 pounds.

Turbo Wash™

Adding the Turbo Wash™ option reduces cycle time
and provides good performance in normal cycle.
By using the Turbo Wash™, We can save the time
without sacrificing performance.
B
A
1
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
C
4
Press .
NOTE
The Turbo Wash™ option cannot be used with
y
all cycles.
y Turbo Wash™ is available in the beginning of
the Cotton/Normal and Perm. Press cycles.
y Press and hold the Turbo Wash™ button to
change the default settings.
OPERATION 27
to the desired cycle.
to the desired cycle.