Installing The Water Line - Samsung RFG298AABP User Manual

instaLLinG tHE watER LinE

Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
use Copper tubing
• ¼" copper tubing
• ¼" compression nut (2pc)
• Ferrule (2pc)
1. Slip the compression nut
2. Tighten the compression nut
- If you are using copper tubing, slip the compression nut
copper tubing (not supplied) as shown.
- If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing .
CAUTION
3. Tighten the compression nut
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug,
leak-free connection.
use Plastic tubing
• ¼" plastic tubing
→ Molded end(Bulb)
• ¼" compression nut (2pc)
through the supplied plastic tubing .
onto the 1/4" compression fitting.
onto the compression fitting. Do not over-tighten the compression nut .
Refrigerator
Plastic tubing
(Supplied)
Ferrule
(Not supplied)
Copper tubing Plastic tubing
or
(Not supplied) (Not supplied)
Household water supply line
(not supplied) and ferrule (not supplied) on
Compression nut
(1/4") (Supplied)
Compression fitting
(Supplied)
Molded end(Bulb)
Compression nut
(1/4") (Not supplied)
Setting Up _19