Whirlpool MED8200FC Installation Instructions Manual page 20

5.
Reinstall hinge and latch on
opposite sides
Using a T25 screwdriver, reinstall the latch plate and latch
®
backing plate with the 3 TORX
the hinge assembly with the 5 screws on the opposite sides
from which they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
20
screws removed earlier and
®
Bottom
of door
7.
Reinstall door on dryer
Using a T25 screwdriver, remove the 4 screws on the
®
dryer. Insert the tabs on the hinge into the mounting slot
and slide down to engage the top tab. Secure in place with
the 4 screws removed earlier.