Whirlpool MED8200FC Installation Instructions Manual page 18

7.
Remove hinge and latch
Using a T25 screwdriver, remove the 3 screws securing
®
the latch plate and latch backing plate and the 5 screws
holding the hinge assembly in place.
8.
Reinstall hinge and latch on
opposite sides
Using a T25 screwdriver, reinstall the latch plate, latch
®
backing plate, and hinge assembly on the opposite sides
from which they were removed.
18
Latch
Hinge
9.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
10.
Reinstall door on dryer
Using a T25 screwdriver, remove the 4 screws on the dryer.
®
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the
4 T25 screws removed earlier.
®
Bottom
of door