Functional Description - Makita TD021 Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before adjusting or
checking function on the tool.
Always switch off the tool before insertion or
•
removal of the battery cartridge.
Installing or removing battery cartridge
1
2
010324
To remove the battery cartridge, withdraw it from
•
the tool while pressing the buttons on both sides of
the cartridge.
To insert the battery cartridge, align the tongue on
•
the battery cartridge with the groove in the housing
and slip it into place. Always insert it all the way
until it locks in place with a little click. If not, it may
accidentally fall out of the tool, causing injury to you
or someone around you.
Do not use force when inserting the battery
•
cartridge. If the cartridge does not slide in easily, it
is not being inserted correctly.
Lock lever
1
2
010325
When the lock lever is in the locked position
switch cannot be actuated.
When the lock lever is in the unlocked position
switch can be actuated.
Switch action
CAUTION:
Before inserting the battery cartridge into the tool,
•
always check to see that the switch actuates
properly and returns to the "OFF" position when
released.
1. Button
2. Battery cartridge
1. Lock lever
2. Switch
, the
, the
5
1
2
010374
To start the tool, first move the lock lever to the unlocked
position to release the switch lever.
A
B
1. Switch
010329
And then turn the switch to A side for clockwise rotation
or to B side for counterclockwise rotation.
Tool speed is increased by increasing rotation force on
the switch. Release the switch to stop.
CAUTION:
Always check the direction of rotation before
•
operation.
Change the direction only after the tool comes to a
•
complete stop. Changing the direction of rotation
before the tool stops may damage the tool.
When not operating the tool, always set the lock
•
lever in the locked position
Lighting up the front light
CAUTION:
Do not look in the light or see the source of light
•
directly.
1
2
010326
To start the tool, first move the lock lever to the released
position to release the switch.
1. Lock lever
2. Switch
B
A
1
.
1. Lock lever
2. Light