Table of Contents
Advertisement
24
[SIMPLINK Setup]
•
When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage.
•
[Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
•
[StandBy]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
All
Send Only
Receive Only
[Crestron]
•
This function enables synchronization with applications provided by Crestron.
•
Server: This menu sets the server's IP address for the network connection with the server (equipment provided by
Crestron).
•
Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is
41794.
•
IP ID (3-254): This menu sets a unique ID for synchronizing with the application.
Transmission
O
O
X
Reception
O
X
O
Advertisement
Chapters
Table of Contents
