3 Get started
Always follow the instructions in this chapter in
The batteries can only back up clock and alarm
settings when AC power is disconnected.
The batteries contain chemical substances, so they
should be disposed of properly.
Open the battery compartment.
Insert 2 AA batteries with correct polarity
(+/-) as illustrated.
Close the battery compartment.
The display backlight is off when AC power is
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
Risk of electric shock! When you unplug the AC adapter,
always pull the plug from the socket. Never pull the cord.
Connect the AC power adaptor to the wall socket.
to turn on the clock radio.
» The clock radio enters FM radio mode.
again to switch the product to
You can only set time in standby mode.
Press and hold SET TIME for two seconds
to activate clock setting mode.
» The hour and minute digits blink.
Press HR repeatedly to set hour.
Press MIN repeatedly to set minute.
Press SET TIME again to confirm.
» The set time is displayed.