Displayport Ver; Hdmi Mode; Eco Saving Plus - Samsung S32R75 Series User Manual

DisplayPort Ver.

Select the DisplayPort version to use.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the product (when set to DisplayPort) is displaying the message
settings of the source device. press the JOG button to display the function-button screen and then select
→ System → DisplayPort Ver. → 1.1 or 1.2↑.

HDMI Mode

Select the HDMI mode to use.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the
HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
― This menu is not available when
PIP/PBP Mode
Check the cable connection and the
is set to On and the Size is set to (PBP Mode).

Eco Saving Plus

The Eco Saving Plus function reduces power consumption by controlling the electric current used by
the product panel.
― This option is not available when
SAMSUNG Bright
MAGIC
― This menu is not available when
Game Mode
― This menu is not available when
Eye Saver Mode
― Not available when
PIP/PBP Mode is set to On.
• Off: Deactivate the Eco Saving Plus function.
• Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
• Low: The power consumption will be reduced by 25% over the default setting.
• High: The power consumption will be reduced by 50% over the default setting.
is in Dynamic Contrast mode.
is enabled.
is enabled.
37