Table of Contents
Advertisement
A / V
(ACA/ACV)
Normal
↓
Peak
(6)
Button : Reset the measurement in peak mode.
(7) LCD Display : Field effect type of liquid crystal display with maximum counts
of 3999. Function symbols and decimal point are controlled by the
microprocessor based on the selected function and measuring mode.
(8) Terminal Cover : Slides over Hi and Lo Terminals to prevent access to them
when OUTPUT terminal is in use.
(9) OUTPUT Terminal (For " 400A" or " 2000A" range only) : Provides DC
voltage output in proportion to the AC or DC current reading. (See section
3.3, OUTPUT Terminal.) The output is connected to a recording device such
as a chart recorder for long hour monitoring. No output is available on
voltage and resistance ranges.
(10) Lo Terminal : Accepts the black test lead for voltage or resistance
measurement.
(11) Hi Terminal : Accepts the red test lead for voltage or resistance
measurement.
(12) Safety Hand Strap : Prevents the instrument from slipping off the hand
during use.
(13) Test Leads (Model 98072) : Connected to Lo and Hi terminals for voltage
or resistance measurement.
(14) Barrier: It is a part providing protection against electrical shock and
ensuring the minimum required air and creepage distances.
2
Display
Resistance
Continuity
check
(Resistance/Continuity)
↓
Display
Ω
IM CL155
Advertisement
Table of Contents
