Table of Contents
Advertisement
1. Instrument Layout
(1)Transformer Jaws : Pick up current flowing through the conductor.
(2) Open/Close Lever : Operates the transformer jaws. Press to open the
Transformer Jaws.
(3) Function Selector Switch : Selects ranges. Also used to power the
instrument on.
(4) Data Hold Button : Freezes the display reading. "
display when Data Hold is enabled.
(5)
Mode Selector Button : On a AC current ("
the resistance (
measurement modes. The instrument is initially set to the normal mode and
can be switched to peak or continuity check mode by means of the mode
button.
IM CL155
) range. Press the mode button to cycle through the
" is shown on the
400A" or "
2000A" or
1
Advertisement
Table of Contents
