Bosch GRL900-20HV Operating/Safety Instructions Manual page 34

instructions listed below may result in
hazardous radiation exposure, electric
shock, fire and/or serious injury.
through a qualified repair person and
only using identical replacement parts.
This will ensure that the functionality of
the remote control is maintained.
The remote control is intended for controlling rotational laser levels in indoor and outdoor use.
Inserting/Replacing the Battery
Using alkali-manganese batteries is recom-
mended for operation of the remote control.
To open the battery lid 8c, press the latch 9c
in the direction of the arrow and remove the
battery lid. Insert the battery provided.
Remote control
Working range
Operating temperature
Storage temperature
Battery
Weight according to
EPTA-Procedure 01/2003
1) The working range can be decreased by unfavorable environmental conditions (e.g. direct sun
irradiation).
Please observe the article number on the type plate of your remote control.
The trade names of individual remote controls may vary.
For clear identification of your remote control, see the serial number 10c on the type plate.
1.800.561.8187
RC1 General Safety Rules
Read all instructions.
Failure to follow all
RC1 Intended Use
RC1 Preparation
RC1 Technical Data
1)
www.
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dusts. Sparks can be created in the
remote control which may ignite the dust
or fumes.
warnings in the operating instructions
of the rotational laser.
When inserting, pay attention to the correct
polarity according to the representation on
the inside of the battery compartment.
Re mo v e t h e b a t t e ry
from the remote control
when not using it for longer periods.
When storing for longer periods, the battery
can corrode and self-discharge.
14 °F ~ 122 °F (–10 °C ~ +50 °C)
–4 °F ~ 158 °F (–20 °C ~ +70 °C)
-34-
information@itm.com
.com
RC1
100 ft (30 m)
1 x 1.5 V LR06 (AA)
2.4 oz. (69 g)