Bosch GRL900-20HV Operating/Safety Instructions Manual page 28

hazardous radiation exposure, electric
shock, fire and/or serious injury.
The laser receiver is intended for swift finding of rotating laser beams in the wavelength listed
in the "Technical Data".
The laser receiver is suitable for indoor and outdoor use.
Inserting/Replacing the Battery
Alkaline batteries are recommended for the
laser receiver.
Pull the latch 16b of battery lid outward and
open the battery lid 15b.
When inserting batteries, pay attention to the
correct polarity according to the representa-
tion on the inside of the battery compart-
ment.
1.800.561.8187
LR10 General Safety Rules
R e a d
instructions.
Failure to follow all instructions
listed below may result in
Keep the laser receiver away
from cardiac pacemakers. The
magnet plate 7b generates a
field that can impair the
f u n c t i o n o f c a r d i a c
pacemakers.
l a s e r r e c e i v e r
laser receiver
laser receiver
LR10 Intended Use
LR10 Preparation
www.
a l l
laser receiver
Noise Information
The A-weighted sound pressure level of the
audio signal at one meter distance is 80
dB(A).
When the battery low indicator 22b appears
for the first time on the display 6b, the laser
receiver can still be operated for approx. 2 h.
when not using it for extended periods.
When storing for extended periods, the
batteries can corrode and self-discharge.
-28-
information@itm.com
.com
laser receiver
Do not hold the tool close
to your ear.
Remove the batteries
from the laser receiver