Table of Contents
Advertisement
1Operating the appliance
You have already learnt about the controls and how
p l i a n c e
O p e r a t i n g t h e a p
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
The timer can also be set when the appliance is
Note:
switched off. Some displays and notes remain visible in
the display after the appliance has been switched off.
Switch off your device when it is not being used. If no
settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Press the on/off button ÿ to switch on the appliance.
All touch fields light up red. The Bosch logo appears in
the display, followed by the maximum microwave
output.
The appliance is ready to use.
The s field lights up red.
You can find out how to set the operating modes in the
individual chapters.
Switching off the appliance
Press the on/off button ÿ to switch off the appliance.
Any functions that may be running are cancelled.
The time appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings.
Operation
Some operating steps are the same for all operating
modes. In the following, you can learn about the basic
operating steps.
Starting the operation
You must press the start/stop button l to start each
operation.
After the operation starts, your settings are shown in the
display. The display ring is also displayed, which shows
the cooking time counting down.
If the operation is paused due to the appliance
Note:
door being opened, the operation must be restarted
using the start/stop button l after the door has been
closed.
Pausing the operation
You can pause and restart the operation by pressing
the start/stop button l.
Press the on/off button to delete all settings.
Notes
Opening the appliance door also pauses the
■
operation.
The fan may continue to run after an operation is
■
paused or cancelled.
Selecting an operating mode
After the appliance is switched on, the default operating
mode is displayed. You can start this setting
immediately.
If you want to select a different operating mode, you
can find detailed descriptions of these modes in the
appropriate chapters.
The following always applies:
Touch the appropriate field.
1.
Turn the rotary selector to change the selection in
2.
focus.
If necessary, change other settings.
3.
To do this, touch the appropriate field and change
the value using the rotary selector.
Press the start/stop button l to start.
4.
The appliance starts the operation.
Operating the appliance en
11
Advertisement
Table of Contents
