Checking The Remote Controller - Samsung AQV09YWAN User & Installation Manual

Checking the remote controller

• Point the remote controller towards the remote controller receiver of the indoor unit.
• W hen you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator( ) appears on the remote controller display.
Remote controller buttons
 Before using the functions of the remote controller, you should set the current time. (Refer to p.14)
Remote controller display
Set the SPi function on/off.
Less energy usage makes your space
cool between the temperature range of
Operate in auto fan speed to cool quickly.
Increase/Decrease the temperature by 1˚C.
Auto clean function – Dry inside of the
indoor unit to get rid of odor.
Set the d'light Cool function on/off.
Set the On Timer on.
Set the Off Timer on.
Temp/Humi
• D isplay the room humidity level and temperature value for 5
seconds on the indoor unit display:
- Hi : High (If the relative humidity is 70% or higher)
- Sd : Standard (If the relative humidity is lower than 70%)
- For room temperature will be displayed the value.
• W hen you press [2
the functions on the remote controller as listed below.
d'light Cool  Temp/Humi, Auto Clean  Beep Off, good' sleep  Display Off, On Timer  Time Set function.
If you select the function under the button while the function of the button is switched by 2
the 2 F function is canceled.
nd
8
AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 8
SPi
Smart Saver
24°C~30°C.
Turbo
Temp + -
Auto Clean
d'light Cool
On Timer
Off Timer
F] button, the indicator will be displayed on the remote controller and you can change
nd
Power
Turn on/off the air conditioner.
Mode
Set one of the 5 operating modes
(see pages 10~11 for instructions).
Quiet
Reduce noise generated from an indoor unit
during operation.
Air swing
Activate/Deactivate air flow blade movement
automatically up and down.
Fan
Adjust how much air flows through the air
conditioner with the 4 different fan speeds
such as Auto/Low/Medium/High.
Set the
Set/Cancel
Cancel the timer/
2 F
nd
Switch the function of the button on the
remote controller.
Beep off
To silence the beep sound when pressing the button.
Display off
To turn off the display light
Time set
Set the current time
mode on.
mode.
F button,
nd
2011-3-19 15:44:46