Table of Contents
Advertisement
Playing MP3/WMA Files
In this case, data may not be
reproduced.
High quality CD-R disc
recommended. Up to 16 characters
are displayed for the name of an
Album or a Track. ID3 TAG version
1.x is required.
Note that the unit may not
play tracks in the order that you wrote
them to the disc.
Menu Function
Press and hold the VOL knob more than 2
seconds to enter menu mode , then each
press changes the mode as follows:
DSP mode->DX/LOCAL mode->STEREO/
MONO mode(Radio mode)->BEEP ON/OFF-
>LOUD ON/OFF->12/24 HOURS mode-
>SWC mode
DSP mode:
Rotate the VOL knob to choose DSP sound
effect:
POP->CLASSIC->ROCK->JAZZ-> DSP OFF
DX/LO (RADIO mode)
Rotate the knob to choose local or
distant
at RADIO mode.
LO: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals
can be received.
STEREO/MONO mode (Radio mode)
Rotate the VOL knob to choose FM stereo or
mono.
BEEP ON/OFF:
Rotate the VOL knob to choose beep sound
on or off.
6
LOUD ON/OFF
Rotate the VOL knob to choose loudness on
or off.
12/24 HOURS mode:
Rotate the VOL knob to select 12 or 24 hour
mode.
SWC (Steering Wheel Control)
Up to 5 function
can be operated
via
existing steering wheel control. This
requires assigning the desired functions to the
buttons of the
steering wheel.
Press the knob to open the menu.
Turn the knob to select a function key.
Turn the knob
select a function for this
function key.
a button of the steering wheel
control until SAVE OK appears on the
display.
The
function is assigned to the
button being pressed.
Repeat these steps for every additional
function assigned to the steering wheel
control.
Advertisement
Table of Contents
