Table of Contents
Advertisement
Installation Guide
Installation Procedures
First complete the electrical connections, and
then check for correctness.
Reset
Press
button to ip down the panel. Then
press the RESET button with a pointed object
to reset the unit to the original status.
Note: Pressing the RESET button will erase
the clock and stored stations.
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below.
The dashboard should be 4.75mm - 5.56mm
thick to be able to support the unit.
183mm
Important: Remove these two screws before installation. Otherwise, the player will not work.
1.
Inset mounting collar into the dashboard, and bend the mounting tabs out with a
screwdriver.
Make sure th lock lever
is flush with the mounting collar (not projecting outward).
2.
Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by
rubber cushion.
3. Insert trim plate.
10
lock lever
Advertisement
Table of Contents
