Table of Contents
Advertisement
Quick Links
Compatibility
This engine will operate on any
traditional O-31 Gauge track
system, including M.T.H.'s
®
™
RealTrax
or ScaleTrax
or
traditional tubular track. It is also
compatible with most standard AC
transformers. (See page 15 for a
complete list of compatible
transformers and wiring
instructions.)
PLEASE READ BEFORE USE AND SAVE
FA-2 AA Diesel
Locomotive Set
OPERATOR'S MANUAL
Advertisement
Table of Contents
Related Manuals for MTHTrains Rail King FA-2 AA Diesel Locomotive Set
Summary of Contents for MTHTrains Rail King FA-2 AA Diesel Locomotive Set
- Page 1 FA-2 AA Diesel Locomotive Set OPERATOR’S MANUAL Compatibility This engine will operate on any traditional O-31 Gauge track system, including M.T.H.’s ® ™ RealTrax or ScaleTrax traditional tubular track. It is also compatible with most standard AC transformers. (See page 15 for a complete list of compatible transformers and wiring instructions.)
-
Page 2: Table Of Contents
Table of Contents Set Up Checklis t....................3 Lubrication.....................3 Basic Operation ....................4 Activating Features.................4 Loco-Sound Operating Instructions..............6 Activating Loco-Sound Features............6 Speed Control..................7 Locking Locomotive Into A Direction..........7 Using Proto-Cast and Proto-Dispatch Features........8 Maintenance......................9 Lubricating and Greasing Instructions...........9 Cleaning The Wheels, Tires and Track..........10 Traction Tire Replacement Instructions..........11 Headlight Replacement Instructions............ -
Page 3: Set Up Checklist
Set Up Checklist • Lubricate the locomotive • Apply power to run as described in the Basic Operating Section of this manual Lubrication DO NOT OVER OIL You should lubricate the engine to prevent it from squeaking. Use light household oil and follow the lubrication points marked “L” in Fig. -
Page 4: Basic Operation
Basic Operation The Throttle knob controls how fast your train will travel. Turn the throttle knob up ½-way, until the engine and caboose lights shine bright. Put the engine into motion by pressing the Direction button on your transformer once. (hold it for approximately 1 second) If the engine does not begin to move as soon as you firmly press the Direction button, you may not have sent enough voltage to the track to make the train move. - Page 5 Manual Volume Control To adjust the volume of all sounds made by this engine, turn the master volume control knob located next to the fuel tank clockwise to increase the volume and counter-clockwise to decrease the volume. Proto-Sound 2.0 Volume Adjustment Knob Figure 2: Manual Loco-Sound Volume Adjustment RailKing FA-2 AA Diesel Set...
-
Page 6: Loco-Sound Operating Instructions
Loco-Sound Operating Instructions Activating Loco-Sound Conventional Mode Features Loco-Sound features are activated by sequences of Bell and Horn button pushes described below. Please read the full descriptions of each feature before using it. To use these buttons to activate features rather than to blow the horn or ring the bell, you should tap the buttons very quickly with a ½-second pause between button presses. -
Page 7: Speed Control
Speed Control M.T.H. engines equipped with Loco-Sound have speed control capabilities that allow the engine to maintain a constant speed up and down grades and around curves, much like an automobile cruise control. You can add or drop cars on the run, and the engine will maintain the speed you set. -
Page 8: Using Proto-Cast And Proto-Dispatch Features
not change direction (including going into neutral) until you repeat the 1 horn, 3 bells code to return the engine to its normal condition, even if the engine is kept without power for extended periods of time. Place Direction Lock Engine into Horn Bell... -
Page 9: Maintenance
Maintenance Lubricating and Greasing Instructions The engine should be well oiled and greased in order to run properly. Regularly lubricate all axles and linkage components and pickup rollers DO NOT to prevent squeaking. Use light household oil, such as that found in M.T.H.'s maintenance kit. -
Page 10: Cleaning The Wheels, Tires And Track
5. After repeating the procedure for the other motor, reassmble the chassis and body, being careful that the wire harnesses are not caught between the chassis and body and reinstall the chassis screws. Motor Mount Screw Lubricate the outside truck block idler and drive gears with grease. -
Page 11: Traction Tire Replacement Instructions
Traction Tire Replacement Instructions Your locomotive is equipped with two neoprene rubber traction tires on each powered truck block. While these tires are extremely durable, you may need to replace them at some point. First, remove the truck sides from the truck block. To do this, turn your engine upside down and remove the chassis as detailed on page 9. -
Page 12: Headlight Replacement Instructions
Headlight Replacement Instructions The locomotive’s headlight is controlled by a constant voltage circuit in the engine. The headlight is easy to remove and replace when it burns out. Replacement bulbs are available directly from the M.T.H. Parts Department. Follow the body removal instructions found in the Lubrication and Greasing Instructions. Gently unscrew old bulb and replace with a new bulb. -
Page 13: Troubleshooting Loco-Sound Problems
Troubleshooting Loco-Sound Problems Although Loco-Sound has been designed and engineered for ease of use, you may have some questions during initial operation. The following table should answer most questions. If your problem cannot be resolved with this table, contact M.T.H. for assistance (telephone: 410-381-2580;... - Page 14 Volume Remedy The sounds seem distorted, especially Loco-Sound volume is set too high. Turn the volume control knob on the when the whistle or bell is activated. bottom of the chassis counter- clockwise to reduce the volume. RailKing FA-2 AA Diesel Set...
-
Page 15: Transformer Compatibility And Wiring Chart
Transformer Compatibility and Wiring Chart Loco-Sound is designed to work with most standard AC transformers. The chart below lists the many compatible transformers. Note that many of the operational commands described in these instructions require a bell button, so if your transformer does not have its own bell button, you should consider adding one to get the full benefit of the system. -
Page 16: Service & Warranty Information
Service & Warranty Information How to Get Service Under the Terms of the Limited One-Year Warranty For warranty repair, follow the instructions below to obtain warranty service. First, e-mail, write, call or fax an Authorized M.T.H. Service Center in your area or M.T.H. Electric Trains to obtain Repair Authorization. - Page 17 AUTHORIZED SERVICE CENTER 7020 Columbia Gateway Dr. - Columbia, MD 21046 Information: 410-381-2580 Fax: 410-381-6122 www.mth-railking.com PARTICIPATING RETAILER LIST ALABAMA FLORIDA LOUISIANA SOUTHERLAND STATION DEPOT HOBBY SHOP AMERICA'S TRAIN YARD HUNTSVILLE LAKE WORTH BATON ROUGE 256-533-4720 561-585-1982 225-926-5592 railway@bellsouth.net jimmyt1982@aol.com www.depothobbies.com MAINE ARIZONA...
- Page 18 MISSOURI COUNTRY AND STUFF RICK'S TOY TRAINS SWITCH STAND ANDOVER TOLEDO SAINT LOUIS 973-786-7086 419-478-0171 314-781-4458 stuff@crystal.palace.net r41877@earthlink.com T & K HOBBY SHOP RIDGEFIELD HOBBY BRIDGEPORT MARK TWAIN HOBBY CENTER RIDGEFIELD 740-633-6607 ST. CHARLES 201-943-2636 salea@tkhobbies.com 636-946-2816 www.tkhobbies.com webmaster@hobby1.com COLUMBUS TRAIN STATION www.hobby1.com COLUMBUS TRAINS-N- THINGS...
- Page 19 THE STATION TENNESSEE WISCONSIN NEW CUMBERLAND MODEL RAILROAD & HOBBY SHOP SOMMERFELD'S TRAINS 717-774-7096 MEMPHIS BUTLER station@paonline.com 901-384-6500 262-783-7797 BUSSINGER TRAINS mrhs99@earthlink.net questions@sommerfelds.com AMBLER www.modelrailroadandhobby.com www.sommerfelds.com 215-628-2366 choochoos@icdc.com TEXAS G B T V & TRAINS www.icdc.com/~btrains HOBBY TIME GREEN BAY AMARILLO 920-496-9697 CHARLEROI SWEEPER CENTER...
Need help?
Do you have a question about the Rail King FA-2 AA Diesel Locomotive Set and is the answer not in the manual?
Questions and answers
How to connect the A to B Unit?