LG F1258RDS Series Owner's Manual page 18

H ow to use washer
Start/Pause
1. Start
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
2. Pause
• If temporary stop of wash cycle is needed,
press "Start/Pause" button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• NB. The door will not open before 1 to 2
minutes when Pause is selected,
or at the end of the wash cycle.
Door Lock
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
Rinse
• Use it to change the
number of rinsings.
18
Wash
• By pressing the option
button, only one option
function may be selected.
NOTE:
Depending on the selected
program cycle, not all
Options may be selectable.
1. Soak
• Use this mode to wash normal clothes or
think and heavy clothes which are
excessively dirty.
• Available in Silent, Sanitary and Normal.
2. Pre Wash
• Use this option for loads that need
pretreatment. This adds 17 minutes of pre
washing before draining.
- When using Pre Wash option, do not use
a liquid detergent for the main wash.
Use powder for the main wash.
• Available in Silent, Sanitary and Normal.
3. Main Wash
• It is the washing type for the general one.
4. Small Load
• Use it for the small laundry.
5. Less Steam
• When you want to do a steam wash for
only a small amount of laundry, select the
this opton.