New World NWDHT1014W Instruction Manual page 22

Functions
Simple everyday use
Child Lock
The Child Lock function allows you to lock the buttons
so that the wash cycle you have chosen cannot be
changed unintentionally.
To activate child lock, press and hold buttons 2 and 3
simultaneously for at least 3 seconds. ''CL'' will flash on
the electronic display for 2 seconds when the child lock
is activated.
If any button is pressed or the selected programme is
changed by the programme dial while the child lock
is active, the "CL" symbol will flash on the electronic
display for 2 seconds.
If the child lock function is active and a programme
is running, when the programme dial is turned to the
CANCEL position and another programme is selected,
the previously selected programme continues from
where it was left.
To deactivate the child lock, press and hold buttons 2
and 3 simultaneously for at least 3 seconds until the
"CL" symbol on the electronic display disappears.
Cancelling Programme
If you want to cancel any programme running:
1.
Turn the programme dial to the "Off" position.
2.
Your machine will stop the washing operation and
the programme will be cancelled.
3. Turn the programme dial to any other programme
to drain the machine.
4.
Your machine will perform the necessary draining
operation and cancel the programme.
5. You can now select and run a new programme.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.newworldassist.co.uk If you still require further assistance, call one of our experts on 0333 305 2263.
22 Functions
Finishing Programme
Your machine will stop by itself as soon as the
programme you have selected finishes.
- "End" led will blink on the display panel.
- You can open the machine's door and remove the
laundry.
- Leave the door of your machine open to allow the
inner part of your machine to dry after removing your
laundries.
- Switch the programme dial to Off position.
- Unplug your machine.
- Turn the water tap off.