Table of Contents
Advertisement
Appendix
Specifications
R Standards
DECT (Digital Enhanced Cordless
Telecommunications)
R Frequency range
1.88 GHz – 1.90 GHz
R RF transmission power
Approx. 93 mW (average power per
channel)
250 mW (max.)
R Power source
220 – 240 V AC, 50/60 Hz
R Power consumption
Standby: 2.3 W
During operation:
3.1 W (when the LED lights are not lit)
4.5 W (when the LED lights are lit)
R Operating conditions
-20 °C – 50 °C
Up to 90 % relative humidity
(non-condensing)
R Transmitting range
Approx. 50 m indoors
Approx. 300 m outdoors
R Image sensor
0.3 megapixel CMOS
R Minimum illuminance required
*1
0 lx
R Focal length
Fixed (0.4 m – infinity)
R Angular field of view (camera angle)
Horizontal: approx. 70°
Vertical: approx. 50°
R Motion detection method
Pyroelectric infrared sensor (PIR sensor)
and visual sensor
R PIR sensor detection range (when the
surrounding temperature is approx.
25 °C)
Horizontal: approx. 70°
Vertical: approx. 20°
Detection range: approx. 5 m
R Visual sensor detection range
Horizontal: approx. 70°
Vertical: approx. 50°
R IP rating
*2
IP55
R Adjustable mounting angles
Horizontal: ±90°
28
Vertical: facing forward - facing down
approx. 60°
(adjustable when mounting)
R Dimensions (height ´ width ´ depth)
Approx. 75 mm ´ 75 mm ´ 173 mm
R Mass (weight)
Approx. 305 g
*1
The infrared LEDs that surround the
camera lens will illuminate in low-light
conditions.
*2
Water resistance is only assured if the
camera is installed correctly according to
the instructions in the Installation Guide,
and appropriate water protection
measures are taken.
Advertisement
Table of Contents
