Table of Contents
Advertisement
Charging Battery
The device has a built-in rechargeable battery. No extra battery installation is required.
Just charge the device when it indicates low battery.
To charge the battery, connect the device to any standard wall outlet via the DC-IN
port using the power adaptor. It takes about 5 hours to fully charge the battery. When
the battery is fully charged, the charge indicator should light up in orange. During
charging, the indicator lights up in red.
Note:
a.
You are strongly recommended to charge the battery immediately when the device indicates the
battery is lower than 15%!
b.
You can operate the device even when it is being charged. But for extended battery life, it is suggested
NOT to use the device when it is charging.
c.
It is recommended to charge the battery before you use the device for the first time.
d.
For maximum performance, lithium-ion batteries need to be used often. If you don't use the device
often, be sure to recharge the battery at least once per month.
e.
Be sure to use only the dedicated power adaptor provided with the unit for charging.
Installing Memory Card
This device can read files directly from memory card.
To use a memory card, find the card slot on the device and then insert the memory
card into the slot in the correct orientation. To access the files stored in the memory
card, enter the Explorer mode by tapping the Explorer icon and select the "SD Card"
directory.
Transferring Files
Before reading or playing files, you need to transfer media files from a computer to the
device.
(1) Connect the device to a computer with the supplied USB cable.
(2) Once the connection is done, the device will notify you that the USB device is
connected as media device.
(3) Instantly, two removable disk drives will show on your computer, one standing for
the internal memory of the device, and the other standing for the memory card
inside it. Now you can copy files from or to the memory card just as you do on your
6
Advertisement
Table of Contents
