Advertisement
Quick Links
XK-16 Stick:
XK-8 Stick:
XK-4 Stick:
XK-24:
XK-0994-UKVM-R
USB 3 Switch Interface:
USB 12 Switch Interface:
3 - 128 Keys
Sends USB Keyboard
Blue or Red Backlighting
Designed, Sold, and Supported in USA
From P.I Engineering,
USA: www.xkeys.com
UK: www.x-keys-UK.com
Software
Download and install X-keys Basic Setup application from:
http://xkeys.com/PISupport/SoftwareMacroWorksHW.php
IMPORTANT
A special procedure is required to put KVM versions of the X-keys into
programming mode. Please find your device below for the correct procedure.
XK-24, XK-60, and XK-80
Hold down the programming button on the top edge of the unit while plugging in
the USB connector. Unplug after programming to return to operating mode.
XKE-40
Use a thumbtack or paper clip to hold the programming button
located on the right end of the unit while plugging in the USB
connector. Unplug the unit after programming to return to
operating mode.
XK-4, XK-8, and XK-16 Stick
Flip the programming switch toward the cord before
plugging in. Unplug and return the switch to operating
position after programming.
XKE-128, USB 3 and 12 Switch Interface
Plug in the USB connector and wait for Windows to
recognize and install the device. Replug the device
into the same USB port and tap the Scroll Lock key on your USB keyboard ten
to fifteen times within ten seconds of replug.
XK-1320-UKVM16-R
XK-1321-UKVM8-SO
XK-1322-UKVM4-R
XK-1446-UKVM3-SO
XK-1475-UKVM12-SO
The No Slogan Company
X-keys KVM Products
Product Manual
XKE-40:
XK-1500-USK40-R
XK-60:
XK-1364-UKVM60-SO
XK-80:
XK-1351-UKVM80-SO
XKE-128:
XK-1391-UKVM128-SO
Advertisement
Related Manuals for X-keys XK-60
Summary of Contents for X-keys XK-60
- Page 1 Download and install X-keys Basic Setup application from: http://xkeys.com/PISupport/SoftwareMacroWorksHW.php IMPORTANT A special procedure is required to put KVM versions of the X-keys into programming mode. Please find your device below for the correct procedure. XK-24, XK-60, and XK-80 Hold down the programming button on the top edge of the unit while plugging in the USB connector.
- Page 2 5. Save your programming file if you plan to program multiple X-keys or modify the programming in the future 6. Return your X-keys to operating mode by unplugging it from the USB port and plugging it in again. Once programmed, the X-keys may be plugged into any system and it will play back programmed keystrokes just like any standard USB keyboard.
- Page 3 Unused keys may be replaced with optional key blockers. Feet The included angled feet may be snapped in to the bottom of the XK-24, XK-60 and XK-80 to give it a slight tilt in either portrait or landscape orientation. Other Products from P.I. Engineering X-keys XK-24 –...
- Page 4 P.I. Engineering will pay for return of product(s) to the customer. P.I. Engineering shall have no responsibility to repair or replace the X-keys product if the failure has resulted from accident, abuse, mutilation, misuse, or repair/modification performed by any entity other than P.I.