Filling The Dishwasher Salt Dispenser - Beko DDT38532X WS User Manual

If the water hardness level adjustment
is set to level 1, the "No salt warning
indicator" will illuminate continuously
although it is not necessary to use salt. If
you use salt under this condition, salt will
not be consumed and the Salt indicator will
not illuminate.
If you move your house, it is necessary
to readjust water hardness level of
your machine by considering the
information given above according to
the hardness level of the supply water
in your new location. Your machine
will display the most recently adjusted
water hardness level.
9. FILLING THE
DISHWASHER SALT
DISPENSER
(Select Models)
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
Use only special softening salts
produced particularly for the
dishwashers in your machine.
It is recommended to use granule- or
powder-formed softening salts in the
water softening system. Do not use
salts that do not completely dissolve
in water such as table salt or rock salt.
Otherwise the performance of the
system may deteriorate in time.
Salt reservoir will be filled with water
when you start the product. For this
reason, add salt before operating the
machine.
1. Firstly, take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A, B).
3. Add 4 cups of water to salt reservoir of
your machine only in initial use (C).
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
33
USA