Table of Contents
Advertisement
Figure 32. Installing the Wi-Fi card
11. Connect the front antenna cable and rear antenna cable to the Wi-Fi card.
Figure 33. Installing the Wi-Fi antenna cables
12. Install the Wi-Fi card adapter into the PCI Express x1 slot on the system board. See "Parts on the
system board" on page 6 .
13. If the installed Wi-Fi card supports the Bluetooth function, use a Bluetooth cable to connect the
Bluetooth connector on the Wi-Fi card adapter to the system board.
14. Pivot the card latch to the closed position to secure the Wi-Fi card adapter.
.
Chapter 7
Installing or replacing hardware
75
Advertisement
Table of Contents
