Table of Contents
Advertisement
RF coaxial cable to TV
ANT IN
TO TV
VIDEO
IN
1
4
DIGITAL
TV OUT
OUT
COAXIAL
IMPORTANT!
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
Use the composite video cable (yellow)
A
to connect the DVD player's TV OUT
(CVBS) jack to the video input jack on
the RF modulator.
Use the RF coaxial cable (not supplied) to
B
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the television.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
01-43_dvp5220_74_eng.indd 9
ANT IN
2
Back of RF Modulator
(example only)
AUDIO IN
R
L
CH3 CH4
ANT IN
3
Connections
To hear sound of this DVD player
C
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the
RF modulator (cable supplied).
Connect the Antenna or Cable TV
D
service signal to the ANTENNA IN or RF
IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
(continued)
9
2008-01-21 10:04:05 AM
Advertisement
Table of Contents
