Using The Preference Setup Menu - Philips DVP5220 Manual

Press   to highlight one of the
D
following options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Choose zero (0) to
balance the contrast.
TINT
Increase the value to darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOR
Increase the value to enhance the color
in your picture or vice versa. Choose
zero (0) to balance the color.
Press   to adjust the setting that best
E
suits your personal preference.
Repeat steps
F D~E
color features.
Press OK to confirm.
G
TIPS: The underlined option is the factory default setting.
Press  to go back to previous menu item. Press SETUP to exit the menu item.
01-43_dvp5220_74_eng.indd 33
DVD Menu Options
for adjusting other
Using the Preference setup
menu
Press STOP Ç twice to stop playback,
A
(if any), then press SETUP on the
remote control.
The system setup menu appears.

- - Preference Page - -
Audio
Subtitle
Disc Menu
Parental
PBC
Mp3/Jpeg Nav
Password
Go To Preference Page
Press   to select { Preference
B
Page }.
Press   to select an item, then press
C
 to access.
Example: { Parental }
The options for the selected item

appears.
If the selection in the menu is greyed

out, that means the feature is not
available or not possible to change at
the current state.
Use   to select a setting and press
D
OK to confirm.
Example: { 8 Adult }
The setting is selected and setup is

complete.
To exit, press SETUP.
E
(continued)

2008-01-21 10:04:08 AM