Reading Version Number; Reset Instruction; Rssi Reading; Parameter Setting Instruction - Ebyte E62 Series User Manual

Chengdu Ebyte Electronic Technology Co,;Ltd

7.3 Reading version number

Instruction format
C3+C3+C3

7.4 Reset instruction

Instruction format
C4+C4+C4

7.5 RSSI reading

Instruction format
C5+C5+C5

7.6 Parameter setting instruction

C0 and C2 are operating parameters. The difference between C0 command and C2 command is that C0 command
will write parameters into the internal flash memory and can be saved when power-down, while C2 command cannot be
saved when power-down, because C2 command is temporarily mend instruction. C2 is recommended for the occasion
that need to change the operating parameters frequently, such as C2 01 0A 1A 0A 44
No. Item
0 HEAD Fix 0xC0 or 0xC2, it means this frame data
is control command
1 ID Frequency-hopping sequence ID
（default 01H）
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
In command mode（M0=0，M1=1）,
User gives the module instruction (HEX format): C3 C3 C3,
Module returns its present version number, for example C3 62 xx yy.
62 here means the module model (E62 series); xx is the version number and yy refers to the other
module features.
In parameter setting mode（M0=1）
User gives the module instruction (HEX format): C4 C4 C4, the module resets for one time.
During the reset process, the module will conduct self-check, AUX outputs low level. After reset
completing, the AUX outputs high level, then the module starts to work regularly which the working
mode can be switched or be given another instruction.
In the configuration mode (M0=1), issue a command to the serial port of the
module (HEX format):C5, C5, C5, the module will return the RSSI value format of
C5, RSSI NOISE, namely C5, average effective signal strength, average NOISE
strength
Description
Description
Description
Description
Notes
Must be 0xC0 or 0xC2

C0: Save the parameters when power-down
C2: Do not save the parameters when
power-down
Frequency-hopping

decided by frequency-hopping ID, both
sides must keep the same.
E62-433T30D user manual
sequence is
10