Advertisement
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same
as that specified on the nameplate of the tool. A power source with voltage greater than that for the specified tool can result in SERIOUS
INJURY to the user - as well as damage to the tool. If in doubt DO NOT PLUG IN THE TOOL. Using a power source with less voltage
is harmful to the motor.
1. KNOW YOUR TOOL
Read and understand the owners manual and labels affixed to the
tool. Learn its application and limitations as well as its specific
potential hazards.
2. GROUND THE TOOL.
This tool is equipped with an approved 3-conductor cord and a
3-prong grounding type plug to fit the proper grounding type
receptacle. The green conductor in the cord is the grounding wire.
NEVER connect the green wire to a live terminal.
3. KEEP GUARDS IN PLACE.
Keep in good working order, properly adjusted and aligned.
4. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
5. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite accidents. Do not leave tools
or pieces of wood on the machine while operating.
6. AVOID DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations or expose them to
rain. Keep work area well lit and provide adequate surrounding
work space.
7. KEEP CHILDREN AND VISITORS AWAY.
All visitors should be kept a safe distance from work area.
8. MAKE WORKSHOP CHILD-PROOF.
Use padlocks, master switches or remove starter keys.
9. USE PROPER SPEED.
A tool will do a better and safer job when operated at the proper
speed.
10. USE RIGHT TOOL.
Don't force the tool or the attachment to do a job for which it was
not designed.
11. WEAR PROPER APPAREL.
Do not wear loose clothing, gloves, neckties or jewelry (rings,
watch) because they could get caught in moving parts. Non-slip
SPECIFIC SAFETY RULES FOR CEMENT MIXERS
To prevent serious injury, read and follow these safety warnings :
1. Do not attempt to use this cement mixer until you are totally
familiar with how to operate it safely. Read instruction manual for
details.
2. Make sure cement mixer is properly grounded.
3. Do not insert hands or shovel into rotating drum.
4. Do not perform any setup work while cement mixer is operating.
5. Always wear safety glasses/face shield while operating this
cement mixer.
6. Always disconnect cement mixer from power source before
performing any maintenance or repairs.
GENERAL & SPECIFIC
SAFETY INSTRUCTIONS
12. ALWAYS WEAR SAFETY GLASSES.
13. DON'T OVERREACH.
14. MAINTAIN TOOL WITH CARE.
15. DISCONNECT TOOLS.
16. AVOID ACCIDENTAL STARTING.
17. USE RECOMMENDED ACCESSORIES.
18. NEVER STAND ON TOOL.
19. CHECK DAMAGED PARTS.
20. NEVER LEAVE MACHINE RUNNING
7. Operators should not wear loose clothing, jewelry or unrestrained
8. Do not move cement mixer while motor is running or with cement
9. Do not exceed 220 lbs drum capacity.
10. Block tires before use.
11. Use only on flat, level surface.
footwear is recommended. Wear protective hair covering to
contain long hair. Roll up long sleeves above the elbows.
Always wear safety glasses (ANSI Z87.1). Everyday eye-glasses
only have impact resistant lenses, they are NOT safety glasses.
Also use a face or dust mask if cutting operation is dusty.
Keep proper footing and balance at all times.
Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
Before servicing, when changing accessories or attachments.
Make sure the switch is in the ''OFF'' position before plugging in.
Consult the manual for recommended accessories. Follow the
instructions that accompany the accessories. The use of improper
accessories may cause hazards.
Serious injury could occur if the tool tips over. Do not store
materials such that it is necessary to stand on the tool to reach
them.
Before further use of the tool, a guard or other parts that are
damaged should be carefully checked to ensure that they will
operate properly and perform their intended function. Check for
alignment of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other
parts that are damaged should be properly repaired or replaced.
UNATTENDED.
Turn power ''OFF''. Don't leave any tool running until it comes to a
complete stop.
hair styles while using this cement mixer.
in drum.
Advertisement
